Self potential method is the most suitable method for prospecting of :
Sulphide ore bodies
Sulphide ore bodies option is correct.
The self-potential (SP) method measures natural, steady-state voltage differences at the ground surface caused by electrochemical cells set up between an ore body and its host. The strong, negative anomalies characteristic of the method arise where a conductive, electronically-connected sulphide body straddles the water table: oxidation at the upper end and reduction at the lower end create a battery-like couple that drives measurable currents and generates the classic SP low over the ore.
The technique therefore works best on massive sulphide bodies (chalcopyrite, pyrite, pyrrhotite, galena, sphalerite) and, secondarily, on graphite. Carbonate, ferruginous (haematite-goethite) and silicate ore bodies lack the electronic conduction and redox couple needed to generate an SP signature, so the method is inapplicable there.
Similar Questions
What will be the focal length of the camera when the scale of the aerial photograph is 1:4500, the flying height of the aircraft is 3780 meters above MSL and the average height of the terrain is 820 meters above sea level ?
A geographic boundary marking the limits of the potential distribution of species is sometimes referred to as :
Granitoids with high magnesium composition that are commonly formed by plate collusion events in Archaean are called :
Banded iron formation closely related to glaciogenic marine sediments are called :
Which one of the following ore minerals show internal reflection ?
Which of the following is not a type of VHMS deposit ?
According to Zingg diagram _____ particles have a flattened cylindrical or disk-like shape such that one axis is much shorter than the other two with a ≈ b << c
A building is to be founded on a clay stratum. The water table is practically at ground surface level. Laboratory test show that the unit weight of the soil is r = 20 kN/m3 and classify the soil as a firm clay. The uniaxial compressive strength is qu = 150 kN/m2. Suppose that the footing will be square, 2 m wide, and the foundation depth will be 2 m below the ground surface, calculate the ultimate bearing capacity.
In a soil mechanics and engineering project, a stratigraphic column below the horizontal ground level of a wide valley is formed by 3 m of coarse gravels over a 12 m clay deposit. Below the clay is a highly permeable fractured sandstone. The water table in the gravel layer is 0.6 m below ground surface. In the sandstone substratum artesian condition with a piezometric height of 6 m above ground level exist. The gravel layer is very permeable and assumed to be hydrostatic. Determine the pore water pressure distribution.
A limestone classified as oomicrite by Folk’s classification but when combining Folk’s and Dunham’s classification it can be classified as :
Important Questions from Mixed Topic (MH-SET)
.................... is a client server application that identifies each host on the internet with a unique user-friendly name.
Every OS has a ................ or .......... which primarily resides in the main memory of the computer to perform some of the basic functions of the OS.
(i) Kernel
(ii) Interface
(iii) Nucleus
(iv) Compiler
Codes:
Which of the following are referred to as low level language?
(i) Machine language
(ii) Assembly language
(iii) High level language
(iv) Natural language
Codes:
Match the following:
List I List II (a) New York Public Library (i) Shelv AR (b) Miami University Augmented Research Group (ii) Smart library (c) Oula University Library (iii) Wolf Walk (d) North Carolina State University (iv) Find the future Codes:
Which part of the QR code represents the encoded data?
