Question
Match List - I with List - II.List - I (Communication System) List - II (Bandwidth) A. AM broadcast I. 7 MHz B. Telephone II. 200 KHz C. Wideband FM III. 4 KHz D. TV IV. 10 KHz
This question was previously asked in
CUET PG 2026 Agri-Business Management Question Paper (25-Mar-2026) (Shift 2)
The correct answer is
A-IV, B-III, C-II, D-I
Matching Communication System Bandwidths
- AM Broadcast: Standard AM radio channels are typically allocated a bandwidth of 10 KHz to prevent interference. This corresponds to option IV.
- Telephone: A single voice channel in traditional telephony uses a bandwidth of approximately 4 KHz, covering the essential range of human speech frequencies (around 300 Hz to 3.4 kHz). This corresponds to option III.
- Wideband FM: Used for applications like FM radio broadcasting, this system requires a larger bandwidth than AM or narrowband FM. It typically uses around 200 KHz per channel to accommodate the wider frequency deviation. This corresponds to option II.
- TV: Analog television broadcasting requires a significant amount of bandwidth for video and audio signals. A standard TV channel bandwidth is approximately 7 MHz. This corresponds to option I.
Final Bandwidth Matching
Based on the typical bandwidth requirements for each communication system:
- A. AM broadcast matches with IV (10 KHz)
- B. Telephone matches with III (4 KHz)
- C. Wideband FM matches with II (200 KHz)
- D. TV matches with I (7 MHz)
Therefore, the correct matching is A-IV, B-III, C-II, D-I.
Was this answer helpful?
Similar Questions
- Which of the following is a sequential logic circuit?
- Which layer in IOT architecture is responsible for data acquisition using sensors?
- Find the inverse of the given matrix:
$$A = \begin{bmatrix} 1 & 0 & 1 \\ -1 & 1 & 1 \\ 0 & 1 & 0 \end{bmatrix}$$ The differential equation $\frac{d^2y}{dx^2} + \frac{dy}{dx} + \sin y = 0$$ is:
- For IPv6 addressing:
A. It has 128-bit address space
B. It supports multicasting
C. It provides built-in IPsec support
D. It has a 32-bit address structure
Choose the correct answer from the options given below: Match List - I with List - II.
List - I (Laws) List - II (Applications) A. Ampere's law I. Force on a charge B. Biot's law II. Force due to a current carrying conductor C. Coulomb's law III. Electric flux density at a point D. Gauss's law IV. Magnetic flux density at a point - DNS is primarily used for:
The pointing vector $P = E \times H$ represents:
- Arrange these digital logic building blocks in order of increasing complexity:
A. Multiplexers
B. Sequential logic circuits e.g.: counters
C. Combinational logic circuits e.g.: adder
D. ALU (Arithmetic Logic Unit)
Choose the correct answer from the options given below: - Signal flow graph is used to find:
Important Questions from Mixed Topic (CUET PG)
- Kalpsutra, the illustrated canonical text is from:-
- The Harappan city almost exclusively devoted to craft production was-:
- Mohandas Karamchand Gandhi launched quit India movement after the failure of:-
- The "Objectives Resolution" was introduced in constituent assembly by:-
- Who among the following was not a member of the constituent assembly:-
Need Expert Advice?
Upcoming Exams
GATE
February 06, 2027
Test Series
CUET
CUET PG Psychology (HUQP20) 2026 Mock Test Series
10 Tests
781 Attempts
3.7(15)
English
More Questions from CUET PG
