An engineering firm is tasked with creating a set of technical drawings for a large-scale project. The client specifies that all components must fit on a single sheet without reducing the drawing scale, and the total drawing area required is approximately 1 square meter. Based on standard drawing sheet sizes, which sheet should the firm select to best meet these requirements?
A0 size sheet
To determine the best sheet size for the engineering firm's technical drawings, we need to consider the approximate area required and match it with standard sheet sizes, without reducing the drawing scale.
The problem states that the total drawing area required is approximately 1 square meter. Standard ISO 216 paper sizes provide the following approximate dimensions:
- A0 size sheet: 841 mm x 1189 mm (which is approximately 1 square meter).
- A1 size sheet: 594 mm x 841 mm (approximately 0.5 square meters).
- A2 size sheet: 420 mm x 594 mm (approximately 0.25 square meters).
- A3 size sheet: 297 mm x 420 mm (approximately 0.125 square meters).
As seen from the dimensions, an A0 size sheet provides an area that is closest to 1 square meter, which matches the requirement to fit all components on a single sheet without reducing the drawing scale.
This makes the A0 size sheet the best choice for the firm to meet the specified project requirements.
Conclusion: The A0 size sheet is the appropriate choice to ensure the technical drawings fit without reducing the drawing scale and still cover the required area of approximately 1 square meter.
Similar Questions
Match the following, according to lettering and numbering (uppercase lettering) as per
BIS SP: 46-2003.
Width (W) Capital letters
(A) 5 (I) W
(B) 6 (II) A, M, Q, V, X, Y
(C) 7 (III) B, D, G, H, K, N, O, P, R, S, T, U and Z
(D) 9 (IV) C, E, F, LWhich of the following statements is/are true about Non-Functional Dimensions (NF) in engineering drawing?
Statement 1: Non-functional Dimensions are shown without limits, as they do not affect the functionality of the component or space.
Statement 2: Non-Functional Dimensions are typically used for reference purposes only, and do not impact the assembly or performance of the component or space.Match the following designations of sheets with their respective trimmed sizes in length and breadth.
Designation Trimmed Size
A) A0 P) 297 × 420
B) A1 Q) 420 × 594
C) A2 R) 594 × 841
D) A3 S) 841 × 1189engineering drawings recommend(s) 20 mm wide margins for sheet sizes AO and A1 in
In a project involving the design of a pipeline for a building, which technical drawings would need to be referenced together?
Match the correct length and breadth of the Trimmed sizes of sheets.
Designation
A. A0
B. A1
C. A2
D. A3
Trimmed size
P. 297 × 420
Q. 420× 594
R. 594 × 841
S. 841 × 1189
- What is the blade length of the T1 'T' square, as per IS:1360-1989?
In an engineering drawing, which letters written on the dimension indicates that it is extra information and NOT really required?
A ________ diagram is a schematic drawing that shows the relationships in a system, using simple shapes for the entities.
The notation 2 × Ø6 means______.
Important Questions from Engineering Drawing
What is a polygon with 12 sides called?
Wiring diagrams, circuit diagrams and electrical installation drawings are examples of which of the following types of engineering drawings?
Which of the following is NOT an element of dimensioning ?
Which of the following drawing instruments is used to draw smooth curves/arcs?
_______ is a dimension that is essential to the functioning of the component or space that is generally shown with limits.
