An apprentice needs to make a rectangular opening in a metal plate with accurate edges and sharp corners. Which combination of fitting tools is most suitable?
Hacksaw and flat file for cutting and edge finishing
To create a rectangular opening in a metal plate with accurate edges and sharp corners, it's essential to choose the right tools that can effectively cut through metal and provide a smooth finish. Let's analyze the given options to determine the most suitable combination of fitting tools:
-
Hacksaw and flat file for cutting and edge finishing:
- Hacksaw: This tool is ideal for cutting straight lines through metal due to its fine, sharp teeth that can efficiently slice through the material.
- Flat file: Used for smoothing and finishing the edges after cutting, helping to create precise, sharp corners and smooth surfaces.
- Conclusion: This combination is highly suitable for the task as it covers both the cutting and edge finishing required for making a rectangular opening.
-
Round file and center punch for corner shaping work:
- Round file: Typically used for making rounded cuts or enlarging round holes. It is not suitable for creating straight edges.
- Center punch: Used to mark the center of a point; doesn’t assist in cutting or finishing edges.
- Conclusion: This option is inappropriate for creating the straight edges and sharp corners of a rectangular opening.
-
Surface plate and scriber for cutting and finishing edges:
- Surface plate: Used for precision work as a flat reference plane but not directly for cutting.
- Scriber: Utilized for marking lines, not effective for cutting or finishing.
- Conclusion: This combination does not include tools for cutting or direct edge finishing.
-
Try square and flat file for layout and edge shaping:
- Try square: Used primarily for checking and marking 90-degree angles and ensuring straightness, not for cutting.
- Flat file: Useful for finishing edges but cannot cut the metal itself.
- Conclusion: Lacks a suitable cutting tool like a hacksaw, making it ineffective for the complete task.
Therefore, the combination of Hacksaw and flat file for cutting and edge finishing is the most appropriate choice as it provides the necessary tools for cutting the metal and finishing the edges accurately.
Similar Questions
Which feature best distinguishes a stud extractor from an open-end spanner in its intended application?
Why is rubber suitable for making seals and gaskets?
To measure Voltage, Current is passed through _______.
A digital multimeter can measure _______.
Identify the temperature sensor which is not used in process industries.
Opto coupler provides _______ between electrical signals or elements of a circuit.
Which device can detect a physical quantity and convert it into an electrical signal?
Which of the following is not the type of inductor?
Generally, wiring a solar controller to a battery storage station is done using a _______.
Important Questions from Miscellaneous
The ration of the number of girls and boys in a school is 8 : 7. If the percentage increase in the number of girls and boys is 10% and 20% respectively, what will be the new ratio?
The cheapest means of transport is:
The property of Catenation is most readily predominant in:
Which newspaper edited by Bal Gangadhar Tilak, was one of the strongest critics of the British rule?
Which of the following is NOT a cause of food and water contamination?
