
A wheel of radius 0.2 m rotates freely about its center when a string that is wrapped over its rim is pulled by force of 10 N as shown in figure. The established torque produces an angular acceleration of 2 rad/s². Moment of intertia of the wheel is ________ kg m².
(Acceleration due to gravity = 10 m/s²)
To find the moment of inertia of the wheel, we need to use the relationship between torque, angular acceleration, and moment of inertia. The formula is:
Torque (τ) = Moment of Inertia (I) × Angular Acceleration (α)
We are given:
First, calculate the torque (τ):
τ = F × r = 10 N × 0.2 m = 2 N·m
Now, rearrange the formula to solve for the moment of inertia (I):
I = τ/α = 2 N·m / 2 rad/s² = 1 kg·m²
The calculated moment of inertia is 1 kg·m², which fits within the given range (1,1), confirming the solution is correct.
A fly wheel of mass $10$ kg and radius $50$ cm is rotating at a rate of$360$ rpm. Assuming mass to be concentrated at the rim, the constant retarding torque required to stop the rotation of wheel in $6$ rotations will be x Nm. The value of x is ____________.
A body moving horizontally on a smooth surface with a speed of $20$ $ms^{-1}$ splits into two parts and continue to move in the same direction. The masses of two parts are in the ratio of $1:2$. The smaller part moves with a speed of $30$ $ms^{-1}$. The fractional change is the kinetic energy is given by $\frac{1}{x}$. The value of x is__________
A thin uniform bar of length L and mass 8 m lies on a smooth horizontal table. Two point masses m and 2 m are moving in the same horizontal plane from opposite sides of the bar with speeds 2v and v respectively. The masses stick to the bar after collision at a distance $\frac{L}{3}$ and $\frac{L}{6}$ respectively from the centre of the bar. If the bar starts rotating about its center of mass as a result of collision, the angular speed of the bar will be :

As shown in the figure, forces of $10^5$ N each are applied in opposite directions, on the upper and lower faces of a cube of side 10 cm, shifting the upper face parallel to itself by 0.5 cm. If the side of another cube of the same material is 20 cm, then under similar conditions as above, the displacement will be :

A satellite of mass 1000 kg is launched to revolve around the earth in an orbit at a height of 270 km from the earth's surface. Kinetic energy of the satellite in this orbit is ________ $\times 10^{10}$ J.
(Mass of earth = $6\times10^{24}$ kg, Radius of earth = $6.4\times10^6$ m, Gravitational constant = $6.67 \times 10^{-11}$ $Nm^2kg^{-2}$)
A fly wheel of mass $10$ kg and radius $50$ cm is rotating at a rate of$360$ rpm. Assuming mass to be concentrated at the rim, the constant retarding torque required to stop the rotation of wheel in $6$ rotations will be x Nm. The value of x is ____________.
A body moving horizontally on a smooth surface with a speed of $20$ $ms^{-1}$ splits into two parts and continue to move in the same direction. The masses of two parts are in the ratio of $1:2$. The smaller part moves with a speed of $30$ $ms^{-1}$. The fractional change is the kinetic energy is given by $\frac{1}{x}$. The value of x is__________