All Exams Test series for 1 year @ ₹349 only
Question

Which of the following is NOT a rigid pavement type?

The correct answer is Mortar Pavement (MP)

Identifying Rigid Pavement Types

Pavements are generally classified into two main types: flexible pavements and rigid pavements. This classification is based on how the pavement structure distributes traffic loads to the underlying subgrade.

Rigid Pavement Characteristics:

  • Rigid pavements are primarily made of Portland cement concrete (PCC).
  • They have significant flexural strength, allowing them to distribute loads over a wide area.
  • The slab itself provides the majority of the structural capacity.
  • They are often used for heavily trafficked roads and airport runways.

Understanding Common Rigid Pavement Types

Common types of rigid pavements include:

  • Jointed Plain Concrete Pavement (JPCP): This is the most common type. It consists of plain concrete slabs with joints to control cracking caused by temperature and moisture changes. There is typically no steel reinforcement except possibly dowel bars at joints for load transfer and tie bars across longitudinal joints.
  • Jointed Reinforced Concrete Pavement (JRCP): Similar to JPCP, but includes steel reinforcement throughout the slab. The reinforcement is not intended for structural strength but to hold together any cracks that might form, making the slab act as a single unit between widely spaced joints.
  • Continuous Reinforced Concrete Pavement (CRCP): This type uses continuous longitudinal steel reinforcement with no transverse joints, except for construction joints. Cracks are expected to form but are held tightly together by the reinforcement.
  • Pre-stressed Concrete Pavement (PCP): In this type, the concrete slab is intentionally pre-stressed (either pre-tensioned or post-tensioned) to induce compressive stresses. This improves the pavement's resistance to tensile stresses caused by traffic loads and environmental factors, allowing for thinner slabs and wider joint spacing. While distinct, it is a form of concrete pavement and considered within the scope of concrete pavement technology, often grouped with rigid pavements due to its structural behavior.

Why Mortar Pavement is NOT a Rigid Pavement Type

Let's examine the options provided:

  • Jointed reinforced concrete pavement (JRCP) is a type of rigid pavement.
  • Pre-stressed concrete pavement (PCP) is a type of concrete pavement, considered rigid or semi-rigid, structurally behaving more like a rigid pavement than a flexible one.
  • Jointed plain concrete pavement (JPCP) is a type of rigid pavement.
  • Mortar Pavement (MP) refers to a pavement made from mortar. Mortar is typically a mixture of cement, sand, and water. Unlike concrete, it lacks coarse aggregate. While mortar has compressive strength, it is not used in the same way as concrete to form structural slabs for distributing heavy traffic loads over a pavement base. Mortar is commonly used in masonry or plastering, not as the main load-bearing layer in highway or road construction classified as either rigid or flexible pavement. Therefore, Mortar Pavement is NOT a standard type of rigid pavement (or even flexible pavement).

Based on the characteristics and common classifications of pavement types, Mortar Pavement (MP) is the option that does not fit the description of a rigid pavement type.

Was this answer helpful?

Important Questions from Pavement Design

  1. Which type of pavement have low or negligible flexural strength?

  2. In flexible pavement analysis, it is assumed that the load transferred through layers by :

  3. The recommended minimum traffic growth rate and design period considered for structural design of flexible pavements for national highways in India as per IRC 37:2018 is __________ percentage and __________ years, respectively.
  4. The value of rigidity factor for design purpose, if the tyre pressure is greater than 0.7 MPa is _____
  5. Various stresses in a jointed plain concrete pavement with slab size of \(3.5\,\text{m} \times 4.5\,\text{m}\) are denoted as follows: \[ \text{Wheel load stress at interior} = S_{wl}^{i} \] \[ \text{Wheel load stress at edge} = S_{wl}^{e} \] \[ \text{Wheel load stress at corner} = S_{wl}^{c} \] \[ \text{Warping stress at interior} = S_{t}^{i} \] \[ \text{Warping stress at edge} = S_{t}^{e} \] \[ \text{Warping stress at corner} = S_{t}^{c} \] \[ \text{Frictional stress between slab and supporting layer} = S_{f} \] The critical stress combination in the concrete slab during a summer midnight is 

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App