All Exams Test series for 1 year @ ₹349 only
Question

In flexible pavement analysis, it is assumed that the load transferred through layers by :

The correct answer is

Grain to grain transfer through points of contact

Flexible Pavement Load Transfer Explained

Flexible pavements, commonly used for roads, differ significantly from rigid pavements (like concrete slabs) in how they distribute vehicle loads. Understanding this load transfer mechanism is crucial in pavement design.

How Flexible Pavements Transfer Load

In a flexible pavement structure, which typically consists of an asphalt concrete surface layer, a granular base course, and a subbase course resting on the subgrade, the load is not carried by beam or slab action as it is in rigid pavements. Instead, the load is transferred and distributed through the layers by a different mechanism.

  • When a load is applied to the surface of a flexible pavement, it causes stress and strain within the asphalt layer and the underlying granular layers.
  • The granular layers (base and subbase) are composed of crushed stone, gravel, or other aggregate materials.
  • The load is transferred from one aggregate particle to the next through the points of contact between the grains. This is known as grain to grain transfer through points of contact.
  • As the load is transferred downwards through the layers, it spreads out over a larger area.
  • This spreading action reduces the stress intensity significantly at lower levels, particularly on the subgrade.
  • The pavement layers essentially deflect under the load and recover once the load passes, exhibiting flexible behavior.

This grain to grain transfer through points of contact is the primary way flexible pavements distribute the applied wheel loads to the underlying subgrade.

Why Other Options Are Incorrect

  • Load stresses are absorbed in the top layer: While the top layer (asphalt) does carry some stress, it doesn't absorb all or most of it. The load is distributed through the entire pavement structure.
  • Beam action: Beam action involves bending resistance and is characteristic of structural beams or members that carry loads over spans. Flexible pavements do not function as beams.
  • Slab action: Slab action involves the distribution of load over a wide area through the rigidity and bending strength of a slab, as seen in concrete rigid pavements. Flexible pavements lack the rigidity to exhibit significant slab action.

Therefore, the correct understanding of load transfer in flexible pavement analysis is based on the concept of grain to grain transfer through points of contact within the granular layers.

Was this answer helpful?

Important Questions from Pavement Design

  1. Which type of pavement have low or negligible flexural strength?

  2. Which of the following is NOT a rigid pavement type?
  3. The recommended minimum traffic growth rate and design period considered for structural design of flexible pavements for national highways in India as per IRC 37:2018 is __________ percentage and __________ years, respectively.
  4. The value of rigidity factor for design purpose, if the tyre pressure is greater than 0.7 MPa is _____
  5. Various stresses in a jointed plain concrete pavement with slab size of \(3.5\,\text{m} \times 4.5\,\text{m}\) are denoted as follows: \[ \text{Wheel load stress at interior} = S_{wl}^{i} \] \[ \text{Wheel load stress at edge} = S_{wl}^{e} \] \[ \text{Wheel load stress at corner} = S_{wl}^{c} \] \[ \text{Warping stress at interior} = S_{t}^{i} \] \[ \text{Warping stress at edge} = S_{t}^{e} \] \[ \text{Warping stress at corner} = S_{t}^{c} \] \[ \text{Frictional stress between slab and supporting layer} = S_{f} \] The critical stress combination in the concrete slab during a summer midnight is 

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App