All Exams Test series for 1 year @ ₹349 only
Question

Various stresses in a jointed plain concrete pavement with slab size of \(3.5\,\text{m} \times 4.5\,\text{m}\) are denoted as follows: \[ \text{Wheel load stress at interior} = S_{wl}^{i} \] \[ \text{Wheel load stress at edge} = S_{wl}^{e} \] \[ \text{Wheel load stress at corner} = S_{wl}^{c} \] \[ \text{Warping stress at interior} = S_{t}^{i} \] \[ \text{Warping stress at edge} = S_{t}^{e} \] \[ \text{Warping stress at corner} = S_{t}^{c} \] \[ \text{Frictional stress between slab and supporting layer} = S_{f} \] The critical stress combination in the concrete slab during a summer midnight is 

The correct answer is

$S_{wl}^c + S_t^c$

Critical Stress Analysis for Concrete Pavement

The question asks for the critical stress combination in a jointed plain concrete pavement during a summer midnight. Understanding the environmental and loading conditions is key.

Understanding Summer Midnight Conditions

  • Temperature Differential: During a summer midnight, the concrete slab is typically cooler than the underlying base or subgrade.
  • Warping Effect: This temperature difference causes the slab to warp. The edges and corners curl downwards, while the center tends to curl upwards. This downward curling at the edges and corners induces tensile stresses at the top surface of the concrete slab.
  • Frictional Stress: In summer, the concrete slab tends to expand. If constrained by friction with the base layer, it develops horizontal compressive stresses. However, for identifying the most critical *tensile* stress combination, the warping and wheel load stresses are primary.

Identifying Critical Stress Locations

  • Corner Stress: Pavement corners are particularly vulnerable due to load concentration and stress amplification. Wheel load stress ($S_{wl}^c$) is highest at the corner.
  • Edge Stress: The edge of the pavement is also a critical location for wheel load stress ($S_{wl}^e$).
  • Warping Stress: Warping stresses ($S_t^c$ and $S_t^e$) are also significant at corners and edges, especially when they are tensile.

Combining Stresses for Criticality

  • The most critical stress condition occurs when tensile stresses from different sources are additive at the most vulnerable locations.
  • For a summer midnight, the downward warping contributes tensile stress at the top of the slab at the corners and edges.
  • The wheel load also induces stresses, which can be tensile at the top surface under certain loading conditions near corners and edges.
  • The combination of corner wheel load stress ($S_{wl}^c$) and corner warping stress ($S_t^c$) represents a critical condition because both stresses are high at the corner and can act in the same direction (tensile at the top).
  • Therefore, the critical stress combination is represented by the sum of these two stresses.

Critical Stress Combination $\approx S_{wl}^c + S_t^c$

Was this answer helpful?

Important Questions from Pavement Design

  1. Which type of pavement have low or negligible flexural strength?

  2. In flexible pavement analysis, it is assumed that the load transferred through layers by :

  3. Which of the following is NOT a rigid pavement type?
  4. The recommended minimum traffic growth rate and design period considered for structural design of flexible pavements for national highways in India as per IRC 37:2018 is __________ percentage and __________ years, respectively.
  5. The value of rigidity factor for design purpose, if the tyre pressure is greater than 0.7 MPa is _____
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App