Which among the following is NOT the method of exploration?
Site exploration is a crucial first step in any construction project. It involves investigating the subsurface conditions of a site to gather information about the soil and rock layers present, their properties, and groundwater conditions. This information is essential for designing safe and economical foundations and other geotechnical structures.
Various methods are employed for site exploration, ranging from simple visual inspections and test pits to more advanced techniques like boring and geophysical surveys. The question asks to identify which among the given options is NOT considered a primary method of exploration.
The options provided are:
Let's briefly look at each option in the context of site investigation:
Boring is clearly a fundamental exploration method as it provides samples and allows detailed logging of strata. Subsurface sounding and probing are also widely used exploratory techniques, helping to map stratigraphy and estimate soil density or strength profiles relatively quickly over larger areas, or in preliminary stages.
A Penetration test (like SPT or CPT), while integral to site investigation, is fundamentally an in-situ test performed *during* or *after* a boring or sounding operation to obtain specific quantitative engineering parameters (like N-value from SPT or cone resistance from CPT). It is a method of measuring soil properties in place, used to supplement the stratigraphic information gathered by exploration methods.
Therefore, while Penetration tests are part of a complete site investigation, they are best classified as in-situ testing methods rather than the primary methods of exploration themselves, like boring or general sounding/probing techniques used specifically for mapping the ground profile.
Based on this distinction, the option that is NOT primarily a method of exploration is the Penetration test.
The ______ method of exploration was developed in connection with prospecting useful minerals and oils.
Shelby tube is one of the most widely used devices for:
If D1 & D2 are inside and outside diameters of the cutting edge then the Area ratio of the sampler is determined using the relation:
Consider the following statements regarding anticline and syncline :
1. The presence of a syncline creates problem of seepage in a dam foundation.
2. There will be more bending of the anticlines in the upper strata and more joints due to tension stresses compared to lower strata.
3. A tunnel passing through a syncline will experience more lateral pressure in the middle part away from the portals.
Which of the above statements are correct?