All Exams Test series for 1 year @ ₹349 only
Question

Shelby tube is one of the most widely used devices for:

The correct answer is

Collecting undisturbed soil samples

Understanding the Shelby Tube

The Shelby tube is a widely used tool in geotechnical engineering for obtaining soil samples. Its primary purpose is related to soil investigation and characterization.

Primary Use of Shelby Tube

A Shelby tube, also known as a thin-walled tube sampler, is specifically designed to collect relatively undisturbed soil samples. This is crucial for laboratory testing where the soil's in-situ structure, density, and moisture content need to be preserved as much as possible to accurately determine its properties like shear strength, consolidation characteristics, and permeability.

The tube, typically made of steel or brass, has a sharp cutting edge at one end. It is pushed (not hammered or rotated) into the soil using static force. This pushing action, along with the thin wall of the tube, minimizes disturbance to the soil structure as the sample enters the tube.

Why Other Options Are Incorrect

  • Drilling rocks and cobbles: Shelby tubes are not designed for drilling through hard materials like rocks or cobbles. They are suitable for cohesive soils like clays and silts where they can be easily pushed. Special drilling equipment like core barrels is used for rock sampling.
  • Measuring effective stress: Measuring effective stress in the ground is typically done using piezometers to determine pore water pressure and calculating total stress, or using specialized sensors like earth pressure cells. A Shelby tube is a sampler, not a measuring device for stress.
  • Wash borings: Wash boring is a drilling method that uses a drilling fluid (usually water) to advance a borehole and remove cuttings. While wash borings create boreholes where sampling can be performed, the wash boring process itself does not collect the sample, and using wash boring alone usually results in disturbed soil conditions within the borehole. Shelby tubes are typically used in conjunction with boring methods (like auger boring or rotary drilling) to obtain samples from specific depths within the borehole, below the disturbed zone caused by drilling.

Based on the design and intended use, the Shelby tube is the standard device among the given options for collecting undisturbed soil samples.

Was this answer helpful?

Important Questions from Site Investigation and Sub-Soil Exploration

  1. The ______ method of exploration was developed in connection with prospecting useful minerals and oils.

  2. Which among the following is NOT the method of exploration?
  3. If D1 & D2 are inside and outside diameters of the cutting edge then the Area ratio of the sampler is determined using the relation:

  4. Consider the following statements regarding anticline and syncline : 

    1. The presence of a syncline creates problem of seepage in a dam foundation. 

    2. There will be more bending of the anticlines in the upper strata and more joints due to tension stresses compared to lower strata. 

    3. A tunnel passing through a syncline will experience more lateral pressure in the middle part away from the portals. 

    Which of the above statements are correct?

  5. Which one of the following statements is not correct regarding soil sampling?
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App