All Exams Test series for 1 year @ ₹349 only
Question

Where is a field magnet coil fitted in DC generator?

This question was previously asked in
RRB ALP 2018 CBT 2 Fitter Question Paper (21-Jan-2019) (Shift 3)
The correct answer is
In the body

DC Generator Field Coil Location

The field magnet coil in a DC generator is responsible for creating the main magnetic field. This magnetic field is essential for the process of electromagnetic induction where voltage is generated in the armature windings.

In the construction of a typical DC generator, the field system, including the field poles and their windings (field coils), is stationary. This stationary part constitutes the outer frame or casing of the generator, commonly referred to as the stator or the generator's body.

The armature, which contains the windings where current is induced, is the rotating part (the rotor). The field coil must remain stationary to produce a constant magnetic field relative to the rotating armature.

Therefore, the field magnet coil is fitted in the body of the DC generator.

Analyzing the options:

  • In the rotor: Incorrect. The armature rotates here.
  • On the shaft: Incorrect. The shaft is the rotating axle.
  • On the back cover: Incorrect. The back cover is a protective component.
  • In the body: Correct. The field coils are part of the stationary stator structure.
Was this answer helpful?

Similar Questions

  1. Why is a DC compound generator preferred for industrial loads?

  2. What is the primary cause of sudden insulation resistance failure in a DC generator?

  3. A DC generator delivers a load current of 25 A at 200 V. If the generated EMF is 205 V, what is the armature resistance?
  4. Which type of DC generator has its field winding connected in parallel with the armature?
  5. Short __________ Compound Generator is a type of DC generator.
  6. In Separately Excited Generator, the field windings are connected in:
  7. Series Generators are generally NOT used because their terminal voltage:
  8. What is the difference of DC voltages in adjoining brushes?

Important Questions from DC Generators

  1. In a 6-pole DC machine, 90 mechanical degrees corresponds to how many electrical degrees?

  2. In DC machine shape of main field flux distribution is

  3. Brushes in a DC machine are normally placed electrically in the

  4. The greatest eddy current loss occurs in ______ part of the DC machine.

  5. Which among the following DC generators produces constant output voltage at all loads?

Need Expert Advice?
Upcoming Exams
RRB NTPC
September 27, 2026
Test Series
RRB ALP img
Railways
RRB ALP 2026 Mock Test series
1035 Tests 1 Tests Free
893 Attempts
4.3(235)
English, Hindi

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App