All Exams Test series for 1 year @ ₹349 only
Question

When two members connected are placed end to end and additional cover plates are provided on both the sides of main plates, the joint is generally known as

The correct answer is

Double Cover Butt Joint

Understanding Structural Joints: Double Cover Butt Joint Explained

The question describes a specific type of connection where two structural members are joined by placing their ends together and then securing them with additional plates on both sides. Let's break down what this configuration means in terms of structural joints.

When members are placed end to end, the joint is classified as a butt joint. This is distinct from a lap joint, where members overlap.

The description also mentions that additional cover plates are provided on "both sides" of the main plates. This means one cover plate is placed on the top side and another on the bottom side (or front and back) across the butt joint. These cover plates are then connected to the main members, typically using fasteners like bolts or rivets, or by welding.

Combining these two features:

  • Members are placed end to end: indicates a Butt Joint.
  • Cover plates are on both sides: indicates a Double Cover configuration.

Therefore, a joint formed by placing two members end to end and using cover plates on both sides is known as a Double Cover Butt Joint.

Let's look at why the other options do not fit the description:

  • Seated Lap Joint: A lap joint involves members overlapping, not placed end-to-end. "Seated" refers to a type of connection detail often used to support a beam end, not the primary joint classification of the main tension/compression members described.
  • Seated Single Cover Butt Joint: While it is a butt joint (members end-to-end), it uses only a single cover plate, not cover plates on "both sides". "Seated" is also not the primary classification.
  • Double Cover Lap Joint: This would involve members overlapping (lap joint) with cover plates on both sides. The question specifically states members are placed end to end, which is a butt joint configuration.

Based on the description provided in the question, the joint where two members are connected end to end with additional cover plates on both sides of the main plates is a Double Cover Butt Joint.

Joint Type Member Arrangement Cover Plates
Butt Joint End to end Can be Single or Double
Lap Joint Overlapping Can be Single or Double
Single Cover Butt Joint End to end One plate on one side
Double Cover Butt Joint End to end Plates on both sides
Single Cover Lap Joint Overlapping One plate on one side
Double Cover Lap Joint Overlapping Plates on both sides

Revision Table: Key Structural Joint Concepts

Term Description Relevance to Question
Butt Joint Connection where members meet end-to-end. Essential part of the described joint type.
Lap Joint Connection where members overlap. Contrasts with the described joint type.
Cover Plate Additional plate used to connect main members at a joint. Presence on both sides is key to the answer.
Single Cover One cover plate used. Distinguishes from the double cover type.
Double Cover Two cover plates used (on opposite sides). Matches the description in the question.

Additional Information on Structural Connections

Structural joints are critical components in buildings, bridges, and other structures, transferring loads between different parts. The choice of joint type depends on various factors, including the type of load (tension, compression, shear, bending), the materials being joined, fabrication methods (bolting, riveting, welding), and economic considerations.

Butt Joints are commonly used for members subjected to tension or compression. The double cover butt joint is often preferred over a single cover butt joint, especially under tensile loads, because it provides a more balanced connection, reducing bending in the main members and cover plates. This balanced load distribution can lead to a more efficient and stronger joint.

Lap Joints are simpler to assemble but can introduce eccentricity in the load path, potentially causing bending in the members, especially under tension. Double cover lap joints are less common than double cover butt joints.

Connections can be made using:

  • Bolts: Easy to install and dismantle. Friction grip bolts or bearing type bolts are used.
  • Rivets: Historically common, but largely replaced by bolting and welding due to ease of installation and noise considerations.
  • Welds: Provide continuous connections and can be very strong, but require skilled labor and inspection.

Understanding the different types of joints and their characteristics is fundamental in structural engineering and design.

Was this answer helpful?

Important Questions from General Design Principles

  1. Assuming that there is no possibility of shear buckling in the web, the maximum reduction permitted by IS 800-2007 in the (low shear) design bending strength of a semi-compact steel section due to high shear is

  2. For inspection of welded joint, the method in which iron fillings are spread over the weld and it is then subjected to an electric current is known as:

  3. ISLC stands for:

  4. As per IS 800-1984, what will be the permissible axial tension for mild steel power driven rivets?

  5. Select the Indian rolled steel section for which depth and weight per meter is written as specification.

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App