All Exams Test series for 1 year @ ₹349 only
Question

As per IS 800-1984, what will be the permissible axial tension for mild steel power driven rivets?

The correct answer is

100 Mpa

Permissible Axial Tension for Mild Steel Rivets

The question asks about the permissible axial tension for power-driven rivets made of mild steel, specifically according to the Indian Standard code IS 800-1984. Design codes like IS 800 provide guidelines and values for various parameters to ensure the safety and stability of structures.

Permissible stress is the maximum stress a material is allowed to experience under loading conditions in structural design, as defined by design codes. For structural steel connections using rivets, different permissible stresses are specified for shear, bearing, and tension.

According to IS 800-1984, the permissible stresses for power-driven shop rivets and power-driven site rivets in mild steel are specified. The value for permissible axial tension for these rivets is a standard value found in the code.

Let's look at the relevant permissible stresses for mild steel rivets as per IS 800-1984 (Table 5.1):

  • Permissible stress in axial tension on the nominal area of the rivet: 100 $\text{MPa}$
  • Permissible stress in shear on the nominal area of the rivet: 100 $\text{MPa}$
  • Permissible stress in bearing on the effective area: 300 $\text{MPa}$

The question specifically asks for the permissible axial tension. Based on the IS 800-1984 code, the value for permissible axial tension for mild steel power-driven rivets is 100 $\text{MPa}$.

Comparing this value with the given options:

  • Option 1: 100 $\text{MPa}$
  • Option 2: 250 $\text{MPa}$
  • Option 3: 415 $\text{MPa}$
  • Option 4: 1000 $\text{MPa}$

The value 100 $\text{MPa}$ matches the permissible axial tension specified by IS 800-1984 for mild steel power-driven rivets.

Was this answer helpful?

Important Questions from General Design Principles

  1. Assuming that there is no possibility of shear buckling in the web, the maximum reduction permitted by IS 800-2007 in the (low shear) design bending strength of a semi-compact steel section due to high shear is

  2. For inspection of welded joint, the method in which iron fillings are spread over the weld and it is then subjected to an electric current is known as:

  3. ISLC stands for:

  4. Select the Indian rolled steel section for which depth and weight per meter is written as specification.

  5. When two members connected are placed end to end and additional cover plates are provided on both the sides of main plates, the joint is generally known as

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App