What will be the effective length of a column of length L (compression member) fixed at one end and hinged at other end i.e. restrained in position but not in rotation?
0.80L
When designing compression members like columns, it's crucial to consider how they might buckle under load. The load at which a column buckles doesn't just depend on its material and cross-section, but also on its length and how its ends are supported. This is where the concept of effective length comes into play.
The effective length of a column is the length of an equivalent pin-ended column that has the same buckling load as the actual column. It is calculated by multiplying the actual length of the column by an effective length factor, often denoted by $k$.
Effective Length ($L_e$) = $k \times$ Actual Length ($L$)
The question describes a specific column end condition: fixed at one end and hinged at the other. Let's break down these conditions:
This configuration is often described as 'fixed-pinned' or 'fixed-supported (with rotation allowed)'. The problem explicitly states "restrained in position but not in rotation" for the hinged end, confirming it's a hinge/pin connection.
For a column that is fixed at one end and hinged at the other, the theoretical effective length factor ($k$) is 0.7. However, in practical design codes (like IS codes or AISC), a slightly higher value is often recommended to account for potential imperfections in achieving a perfectly fixed end or perfectly hinged end, or due to variations in material and geometry.
Commonly used effective length factors for this specific end condition are often taken as 0.8.
Given the actual length of the column is $L$, and the effective length factor for a fixed-hinged column is taken as 0.80, the effective length ($L_e$) is:
$$L_e = k \times L$$
$$L_e = 0.80 \times L$$
$$L_e = 0.80L$$
This means the fixed-hinged column behaves like a pin-ended column of length $0.80L$ in terms of buckling.
Let's look at the provided options:
Based on standard engineering practice and design codes, the effective length of a column fixed at one end and hinged at the other is $0.80L$.
What will be the effective length of a column of length L (compression member) fixed at both ends i.e. restrained in position and rotation?
What is the recommended value of effective length for a column held in position and restrained against rotation at one end, and at the other end restrained against rotation but not held in position?
The effective length of a compression member whose both ends are fixed in position only is _____.
A steel column (f y= 250 N/mm 2, and f cd = 200 N/mm 2) of effective sectional area 6000 mm 2 will have strength equal to _____.