All Exams Test series for 1 year @ ₹349 only
Question

A steel column (f y= 250 N/mm 2, and f cd = 200 N/mm 2) of effective sectional area 6000 mm 2 will have strength equal to _____.

The correct answer is

1200 kN

Steel Column Strength Calculation

The strength of a steel column, also known as its design compressive strength or capacity, is determined by its effective sectional area and the permissible or design stress it can withstand in compression. In this specific problem, we are directly given the effective sectional area and the design compressive stress.

We are given the following values:

  • Effective sectional area, $A_e = 6000 \text{ mm}^2$
  • Design compressive stress, $f_{cd} = 200 \text{ N/mm}^2$
  • Yield strength, $f_y = 250 \text{ N/mm}^2$ (Note: While yield strength is given, the design stress $f_{cd}$ already accounts for material properties and safety factors, so we use $f_{cd}$ directly to find the design strength).

Calculating Steel Column Strength

The strength of the column is calculated using the formula:

Strength = Design compressive stress $\times$ Effective sectional area

Substituting the given values into the formula:

Strength = $f_{cd} \times A_e$

Strength = $200 \text{ N/mm}^2 \times 6000 \text{ mm}^2$

Strength = $1200000 \text{ N}$

The result is in Newtons (N). The options are given in kiloNewtons (kN). To convert Newtons to kiloNewtons, we divide by 1000:

Strength (kN) = $\frac{1200000 \text{ N}}{1000 \text{ N/kN}}$

Strength (kN) = $1200 \text{ kN}$

Thus, the strength of the steel column is 1200 kN.

Was this answer helpful?

Important Questions from Compression Member

  1. What will be the effective length of a column of length L (compression member) fixed at one end and hinged at other end i.e. restrained in position but not in rotation?

  2. What will be the effective length of a column of length L (compression member) fixed at both ends i.e. restrained in position and rotation?

  3. What is the recommended value of effective length for a column held in position and restrained against rotation at one end, and at the other end restrained against rotation but not held in position?

  4. The effective length of a compression member whose both ends are fixed in position only is _____.

  5. If the depth of two column sections are equal, then the column splice is provided _____
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App