Valid range for the degree of saturation (S) of soil in percentage is
0 ≤ S ≤ 100
The degree of saturation (S) is a fundamental concept in soil mechanics and geotechnical engineering. It represents the extent to which the void spaces within a soil sample are filled with water. Understanding this parameter is crucial for analyzing various soil properties and behaviors.
The degree of saturation (S) is mathematically defined as the ratio of the volume of water (\(V_w\)) to the volume of voids (\(V_v\)) in a soil mass. It is often expressed as a percentage.
Mathematically, it is given by:
\[ S = \frac{V_w}{V_v} \times 100\% \]
The range for the degree of saturation (S) is determined by two extreme conditions for soil:
When the soil is completely dry, there is no water present in the void spaces. Therefore, the volume of water (\(V_w\)) is zero.
In this case, the degree of saturation (S) would be:
\[ S = \frac{0}{V_v} = 0 \]
Or, in percentage: \(S = 0\%\).
When the soil is completely saturated, all the void spaces are filled with water. This means the volume of water (\(V_w\)) is equal to the volume of voids (\(V_v\)).
In this case, the degree of saturation (S) would be:
\[ S = \frac{V_v}{V_v} = 1 \]
Or, in percentage: \(S = 100\%\).
Considering these two extreme conditions, the degree of saturation (S) can take any value between 0% and 100%, inclusive. It cannot be less than 0% (as volume of water cannot be negative) and cannot be greater than 100% (as volume of water cannot exceed the volume of voids).
| Soil Condition | Volume of Water (\(V_w\)) | Degree of Saturation (S) |
|---|---|---|
| Completely Dry | \(V_w = 0\) | \(S = 0\) (or 0%) |
| Partially Saturated | \(0 < V_w < V_v\) | \(0 < S < 1\) (or 0% < S < 100%) |
| Completely Saturated | \(V_w = V_v\) | \(S = 1\) (or 100%) |
Therefore, the valid range for the degree of saturation (S) of soil, when expressed in percentage, is from 0 to 100, including both 0 and 100. This means the degree of saturation (S) can be equal to 0, equal to 100, or any value in between.
This can be represented mathematically as: \(0 \le S \le 100\).
The smallest water content at which the soil is saturated, is indicated by:
Identify the correct relation between the void ratio (e) and porosity (n) related to soil mechanics.
The ratio of volume of air voids to the volume of the total voids in known as
The minimum water content in a soil at which the soil just begins to crumble when rolled into threads of 3 mm in diameter, is known
A fully saturated soil is said to be