The minimum water content in a soil at which the soil just begins to crumble when rolled into threads of 3 mm in diameter, is known
Plastic Limit
In the field of soil mechanics, understanding the behavior of soil at different water contents is essential for various engineering applications. Soils exhibit distinct consistency states, ranging from liquid to solid, depending on the amount of water they contain. These states are defined by specific water content boundaries known as Atterberg Limits, which are fundamental for classifying cohesive soils. The main Atterberg Limits include the Liquid Limit, Plastic Limit, and Shrinkage Limit.
The question describes a specific test used to determine a crucial soil property related to its water content. This property is precisely defined as the Plastic Limit.
To fully grasp soil behavior and the importance of the plastic limit, it is beneficial to understand how it differs from other related soil limits:
| Limit Name | Definition and Characteristics |
|---|---|
| Liquid Limit (LL) | This is the minimum water content at which the soil is still in a liquid state but possesses a very small shear strength. It is typically determined using a Casagrande apparatus, where a standard groove cut into the soil sample closes over a distance of 12.5 mm after 25 blows. It defines the boundary between the liquid and plastic states. |
| Plastic Limit (PL) | As discussed, this is the minimum water content at which the soil just begins to crumble when rolled into threads of 3 mm in diameter. It defines the boundary between the plastic and semi-solid states. |
| Shrinkage Limit (SL) | This is the maximum water content at which a reduction in water content will no longer cause a decrease in the overall volume of the soil mass. Below this limit, the soil is considered to be in a solid state, and its volume remains constant upon further drying, even if more water is removed. |
| Permeability Limit | It is important to note that "Permeability Limit" is not a standard Atterberg consistency limit. Permeability is a soil property that quantifies the ease with which water can flow through the interconnected pore spaces within the soil. It is a measure of hydraulic conductivity and does not define a transition point between soil consistency states like the Atterberg limits do. |
Based on the precise definitions of these soil consistency limits, the condition described in the question—where the soil just begins to crumble when rolled into threads of 3 mm in diameter—is the exact definition for the Plastic Limit.
The smallest water content at which the soil is saturated, is indicated by:
Identify the correct relation between the void ratio (e) and porosity (n) related to soil mechanics.
The ratio of volume of air voids to the volume of the total voids in known as
Valid range for the degree of saturation (S) of soil in percentage is
A fully saturated soil is said to be