All Exams Test series for 1 year @ ₹349 only
Question

The surface where two successive placements of concrete meet are known as

The correct answer is

Construction joint

Understanding Concrete Joints: Construction, Contraction, and Expansion

When working with concrete, it's essential to understand the different types of joints created or formed during placement. These joints serve specific purposes related to the structural integrity and long-term performance of the concrete element.

The question asks about the surface where two successive placements of concrete meet. This refers to situations where concreting is stopped for a period and then resumed later. Let's look at the options provided:

  • Contraction joint: These joints are deliberately cut or formed in concrete to create weakened planes. Their purpose is to control where cracks occur due to drying shrinkage of the concrete. Without these joints, random, unsightly cracks might appear.
  • Expansion joint: Also known as isolation joints, these are full depth joints that separate concrete slabs from walls, footings, or other fixed elements, or even separate large areas of pavement. They are designed to allow for movement caused by thermal expansion and contraction of the concrete due to temperature changes.
  • Construction joint: These joints are created when the placement of concrete is interrupted. They are formed at the surface where fresh concrete is placed against concrete that has already hardened or started to harden from a previous placement. They essentially divide large concrete structures into manageable sections for pouring.
  • Both Contraction joint and Expansion joint: This option is incorrect because the question specifically describes a joint formed by the meeting of two successive placements, which is the definition of a construction joint, not a combination of contraction and expansion joints.

Based on the definitions, the surface where two successive placements of concrete meet precisely matches the description of a construction joint. These joints are necessary for practical construction purposes, allowing work to stop and start. Proper treatment of construction joints is crucial to ensure good bond and structural continuity between the different concrete pours.

Consider the different purposes of these joints:

  • Contraction Joints: Manage shrinkage cracking.
  • Expansion Joints: Accommodate thermal movement.
  • Construction Joints: Facilitate phased pouring of concrete.

Therefore, the surface formed between two distinct pours of concrete is known as a construction joint.

Comparison of Concrete Joint Types
Joint Type Primary Purpose How Formed
Contraction Joint Control shrinkage cracking Saw cutting, grooving, or inserting strips in fresh concrete
Expansion Joint Allow thermal expansion/contraction Inserting pre-moulded filler material (e.g., fibreboard, foam) full depth
Construction Joint Surface between successive pours Formed when new concrete is placed against existing hardened concrete

Revision Table: Key Concrete Joint Concepts

Concept Definition Relevance to Question
Concrete Joint A discontinuity in a concrete structure. The question asks to identify a specific type of joint.
Successive Placements Pouring new concrete adjacent to or on top of concrete that has already been placed and hardened. This is the defining characteristic mentioned in the question.
Construction Joint The surface formed where two successive concrete placements meet. Directly answers the question based on its definition.
Contraction Joint A joint designed to control cracking from concrete shrinkage. Not formed by successive pours meeting; different purpose.
Expansion Joint A joint designed to accommodate thermal movement. Not formed by successive pours meeting; different purpose and formation method.

Additional Information on Concrete Construction Joints

Construction joints are typically located at points of minimum shear force or at specific locations indicated on the design drawings. They can be made keyed or doweled to transfer loads across the joint and maintain alignment between the adjacent concrete sections. Proper preparation of the existing concrete surface at a construction joint (cleaning, roughening, and possibly applying a bonding agent) is crucial to ensure adequate bond with the new concrete pour.

Examples of where construction joints are common include:

  • Between the foundation and walls.
  • Between different lifts of concrete walls.
  • Between columns and beams/slabs.
  • At the end of a day's pour in a large slab or pavement.
Was this answer helpful?

Important Questions from Pavement Design

  1. Which type of pavement have low or negligible flexural strength?

  2. In flexible pavement analysis, it is assumed that the load transferred through layers by :

  3. Which of the following is NOT a rigid pavement type?
  4. The recommended minimum traffic growth rate and design period considered for structural design of flexible pavements for national highways in India as per IRC 37:2018 is __________ percentage and __________ years, respectively.
  5. The value of rigidity factor for design purpose, if the tyre pressure is greater than 0.7 MPa is _____
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App