Question
The sequence of warp preparation for weaving is :
A. warping
B. sizing
C. winding
D. drawing and denting in
E. weaving
Choose the correct answer from the options given below :
This question was previously asked in
CUET PG 2026 Agri-Business Management Question Paper (25-Mar-2026) (Shift 2)
The correct answer is
C, A, B, D, E
Understanding Warp Preparation Sequence for Weaving
The process of preparing yarns for weaving involves several key steps. Correctly sequencing these steps is crucial for efficient fabric production. The sequence focuses on preparing the warp beam correctly before the actual weaving.
Step-by-Step Analysis of Warp Preparation
Let's analyze the sequence of warp preparation for weaving:
- C. Winding: This is the initial step. Yarn is transferred from smaller packages (like cones or spools) to larger ones suitable for the next stage, often involving yarn cleaning.
- A. Warping: Multiple ends of yarn are brought together and run parallel from the winding packages onto a large cylinder called a warp beam.
- B. Sizing: The warp yarns are coated with a protective substance (size) to increase their strength and reduce breakage during weaving. This is typically done after warping.
- D. Drawing and Denting In: This critical stage involves drawing each warp end through the correct loop (heald eye) of the weaving harness and then through the correct space (dent) in the reed.
- E. Weaving: This is the final process where the prepared warp is interlaced with the weft to create the fabric. It follows all preparation steps.
Determining the Correct Sequence
Based on the analysis, the logical order for warp preparation leading to weaving is:
- C. Winding
- A. Warping
- B. Sizing
- D. Drawing and Denting In
- E. Weaving
This sequence corresponds to the order C, A, B, D, E.
Conclusion: Correct Option Identification
The option that matches the correct sequence C, A, B, D, E is the correct answer.
Was this answer helpful?
Similar Questions
- Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : The yarn strength depends on the level of twist given in the final stage of ring spinning.
Reason (R) : Twist helps in binding the fibres through lateral pressure exerted by outer layers of fibres on the fibres in the core.
In the light of the above statements, choose the most appropriate answer from the options given below : - Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : The configuration and orientation of fibres in a yarn decides the uniformity of twisted yarn.
Reason (R) : The proper drafting in different stages of spinning changes the configuration and orientation of fibres.
In the light of the above statements, choose the most appropriate answer from the options given below : - Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : The single thread tensile strength tester works on pendulum lever principle.
Reason (R) : The force acting on the specimen is directly proportional to the sine of the angle through which the pendulum is lifted from its vertical rest position.
In the light of the above statements, choose the most appropriate answer from the options given below : - Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : Latch needles are self sufficient, no extra element is required for hook closure.
Reason (R) : When the needle moves up and down, the formed loop opens and closes the latch.
In the light of the above statements, choose the most appropriate answer from the options given below : - Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : The uneven dyeing leads to the poor appearance in case of cotton fabric.
Reason (R) : The mature cotton fibres poses the problems in uniform dyeing.
In the light of the above statements, choose the most appropriate answer from the options given below : - Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : Polyester does not require desizing before dyeing.
Reason (R) : Polyester contains natural waxes and pectins.
In the light of the above statements, choose the most appropriate answer from the options given below : - In the draw texturising machine, the passage of yarn is :
A. primary heater
B. secondary heater
C. winding unit
D. creel
E. friction unit
Choose the correct answer from the options given below : - The sequence of processes involved in the chemical processing is :
A. scouring
B. finishing
C. dyeing
D. desizing
E. bleaching
Choose the correct answer from the options given below : - Melt spinning involves the continuous process for the multi-filament yarn manufacturing follows the sequence as :
A. melting of chips
B. quenching
C. extrusion of melt
D. drying of chips
E. winding on the bobbin
Choose the correct answer from the options given below : - The major parts of the sizing machine are arranged in the sequence as :
A. drying cylinder
B. beaming unit
C. creel
D. splitting rods
E. size Box
Choose the correct answer from the options given below :
Important Questions from Miscellaneous
- Which of the following scheduler/schedulers is/are also called CPU scheduler ?
(A). Short Term Scheduler
(B). Long Term Scheduler
(C). Medium Term Scheduler
(D). Asymmetric Scheduler
Choose the correct answer from the options given below: - A situation where two or more processes are blocked, waiting for resources held by each other is called:
- External fragmentation occurs ________.
- Which disk scheduling algorithm looks for the track closest to the current head position?
- Which CPU scheduling algorithm prefers the process with the shortest burst time?
Need Expert Advice?
Upcoming Exams
GATE
February 06, 2027
Test Series
CUET
CUET PG Psychology (HUQP20) 2026 Mock Test Series
10 Tests
753 Attempts
3.7(14)
English
More Questions from CUET PG
