All Exams Test series for 1 year @ ₹349 only
Question

The most suitable section for a steel column is:

The correct answer is

ISHB

Steel Column Selection for Structural Stability

In structural engineering, selecting the appropriate steel section for a column is crucial for ensuring the stability and load-carrying capacity of a structure. Steel columns are primarily designed to resist axial compressive loads and prevent buckling. The suitability of a steel section for a column depends on its geometric properties, particularly its moment of inertia and radius of gyration, which dictate its resistance to buckling.

Understanding Different Indian Standard Steel Sections

The Indian Standard (IS) designates various steel sections based on their shape, size, and intended use. Let's examine the options provided:

  • ISLB (Indian Standard Light Beam): These sections are typically lighter in weight and have smaller dimensions. While they can carry some load, they are primarily designed as beams for lighter structural applications, such as purlins or secondary beams, where bending resistance is more critical than axial compression or buckling resistance for columns.
  • ISMB (Indian Standard Medium Beam): These are medium-weight sections commonly used as beams in general construction. They offer better bending resistance than ISLB sections but are still optimized for beam action, meaning they are less efficient as columns due to their relatively smaller flange widths compared to sections specifically designed for compressive loads.
  • ISHB (Indian Standard Heavy Beam): Despite having "Beam" in their designation, ISHB sections are characterized by a larger flange width and often a thicker web compared to ISLB and ISMB sections of similar depth. This larger cross-sectional area, especially the wider flanges, significantly increases their moment of inertia ($I_{xx}$ and $I_{yy}$) and radius of gyration ($r_{xx}$ and $r_{yy}$). These properties are vital for resisting buckling under axial compressive loads, making them highly suitable for use as steel columns, stanchions, and heavy-duty girders. Their robust design provides excellent axial load-carrying capacity and high stiffness.

Why ISHB is the Most Suitable Steel Column Section

For a steel column, the primary concern is its ability to withstand compressive forces without buckling. Buckling is a sudden lateral deflection of a slender compression member at a critical load. The resistance to buckling is directly related to the member's stiffness, which is influenced by its cross-sectional geometry, specifically the moment of inertia and radius of gyration.

  • High Moment of Inertia: ISHB sections possess a significantly higher moment of inertia compared to ISLB and ISMB sections of similar depth. A higher moment of inertia means greater resistance to bending and buckling, which is essential for a steel column.
  • Larger Radius of Gyration: The radius of gyration ($r = \sqrt{I/A}$) is a measure of a column's resistance to buckling about an axis. ISHB sections, with their wider flanges and greater area distributed further from the centroid, have a larger radius of gyration, making them inherently more resistant to buckling.
  • Increased Axial Load Capacity: Due to their robust cross-section, ISHB sections can safely carry much heavier axial compressive loads than ISLB or ISMB sections, which are better suited for bending.

Therefore, when considering the most suitable section for a steel column, ISHB stands out because its design properties are optimized for resisting axial compression and preventing buckling, making it the preferred choice for heavy-duty columns in multi-story buildings, industrial structures, and other applications requiring high load-bearing capacity and stability.

Was this answer helpful?

Important Questions from General Design Principles

  1. Assuming that there is no possibility of shear buckling in the web, the maximum reduction permitted by IS 800-2007 in the (low shear) design bending strength of a semi-compact steel section due to high shear is

  2. For inspection of welded joint, the method in which iron fillings are spread over the weld and it is then subjected to an electric current is known as:

  3. ISLC stands for:

  4. As per IS 800-1984, what will be the permissible axial tension for mild steel power driven rivets?

  5. Select the Indian rolled steel section for which depth and weight per meter is written as specification.

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App