The mass fraction of α ferrite and cementite in pearlite is
0.888 and 0.112 respectively
Pearlite is a microconstituent found in steels and cast irons that forms during the cooling of austenite. It is a lamellar (layered) structure composed of alternating plates of alpha ferrite ($\alpha$) and cementite ($\text{Fe}_3\text{C}$). This structure forms through the eutectoid reaction in the iron-carbon system at approximately $727^{\circ}\text{C}$ and a carbon concentration of $0.77$ weight percent.
To determine the mass fraction of each phase within pearlite, we can use the lever rule on the iron-carbon phase diagram at the eutectoid temperature ($727^{\circ}\text{C}$) and the eutectoid composition ($0.77 \text{ wt\% C}$). The two phases present in pearlite at this temperature are alpha ferrite and cementite.
We need the compositions of the phases at the eutectoid temperature:
Using the lever rule, the mass fraction of alpha ferrite ($\text{W}_{\alpha}$) in pearlite is given by the formula:
\(\text{W}_{\alpha} = \frac{\text{C}_{\text{Fe}_3\text{C}} - \text{C}_{\text{eutectoid}}}{\text{C}_{\text{Fe}_3\text{C}} - \text{C}_{\alpha}}\)
Plugging in the values:
\(\text{W}_{\alpha} = \frac{6.67 - 0.77}{6.67 - 0.022} = \frac{5.90}{6.648}\)
\(\text{W}_{\alpha} \approx 0.8875\)
The mass fraction of cementite ($\text{W}_{\text{Fe}_3\text{C}}$) in pearlite is then:
\(\text{W}_{\text{Fe}_3\text{C}} = 1 - \text{W}_{\alpha}\)
\(\text{W}_{\text{Fe}_3\text{C}} = 1 - 0.8875\)
\(\text{W}_{\text{Fe}_3\text{C}} \approx 0.1125\)
Rounding the calculated mass fractions to three decimal places, we get approximately $0.888$ for alpha ferrite and $0.112$ for cementite.
Therefore, the mass fraction of alpha ferrite in pearlite is approximately $0.888$, and the mass fraction of cementite is approximately $0.112$. These values correspond to the proportions of the two phases that make up the pearlite structure at the eutectoid composition.
| Component | Mass Fraction in Pearlite |
|---|---|
| Alpha Ferrite ($\alpha$) | \(\approx 0.888\) |
| Cementite ($\text{Fe}_3\text{C}$) | \(\approx 0.112\) |
Comparing these values with the given options, the option listing $0.888$ and $0.112$ respectively for alpha ferrite and cementite matches our calculation.
Steel containing less than 0.8% carbons are called ________ and those which contain more than 0.8% carbons are called _______.
The carbon present in Cast irons may occur in the chemically combined form known as _____
The supersaturated interstitial solid solution of carbon in alpha iron is known as
In an iron – carbon diagram, the percentage by weight of carbon at eutectoid composition is
Which of the following is not a condition of Hume Rothery Rule for solid solutions?