All Exams Test series for 1 year @ ₹349 only
Question

Steel containing less than 0.8% carbons are called ________ and those which contain more than 0.8% carbons are called _______.

The correct answer is

hypo eutectoid, hypereutectoid

Understanding Steel Classification by Carbon Content

Steel is essentially an alloy of iron and carbon, with carbon being the primary strengthening element. The amount of carbon present significantly affects the properties and classification of steel.

One important point on the Iron-Carbon phase diagram for plain carbon steels is the eutectoid point, which occurs at approximately 0.8% carbon and 727°C. This point is crucial for classifying steels based on their carbon content relative to this percentage.

Hypo Eutectoid Steel and Hypereutectoid Steel

Steels are commonly classified based on whether their carbon content is less than or greater than the eutectoid composition (0.8% carbon):

  • Hypo eutectoid steel: This term refers to steels that contain less than the eutectoid amount of carbon. Specifically, steels with carbon content ranging from 0.02% to 0.8% are classified as hypo eutectoid steels.
  • Hypereutectoid steel: This term is used for steels that contain more than the eutectoid amount of carbon. These steels typically have carbon content ranging from 0.8% to about 2.1% (the maximum solubility of carbon in austenite).

Considering these definitions:

  • Steel containing less than 0.8% carbon is called hypo eutectoid steel.
  • Steel containing more than 0.8% carbon is called hypereutectoid steel.

Therefore, the correct terms to fill the blanks are 'hypo eutectoid' and 'hypereutectoid' respectively.

Was this answer helpful?

Important Questions from Phase Diagrams

  1. The carbon present in Cast irons may occur in the chemically combined form known as _____

  2. The supersaturated interstitial solid solution of carbon in alpha iron is known as

  3. In an iron – carbon diagram, the percentage by weight of carbon at eutectoid composition is

  4. The mass fraction of α ferrite and cementite in pearlite is

  5. Which of the following is not a condition of Hume Rothery Rule for solid solutions?

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App