All Exams Test series for 1 year @ ₹349 only
Question

The distance between centres of rivet holes should not be less than -

The correct answer is

2.5 times the diameter of the holes

Looking at the given options: 3 times the diameter of the holes 2.5 times the diameter of the holes 2 times the diameter of the holes 3.5 times the diameter of the holes The value that matches the standard minimum distance requirement for the centre-to-centre spacing of rivet holes is 2.5 times the diameter of the holes.

Was this answer helpful?

Important Questions from General Design Principles

  1. Assuming that there is no possibility of shear buckling in the web, the maximum reduction permitted by IS 800-2007 in the (low shear) design bending strength of a semi-compact steel section due to high shear is

  2. For inspection of welded joint, the method in which iron fillings are spread over the weld and it is then subjected to an electric current is known as:

  3. ISLC stands for:

  4. As per IS 800-1984, what will be the permissible axial tension for mild steel power driven rivets?

  5. Select the Indian rolled steel section for which depth and weight per meter is written as specification.

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App