Match the following. List – I List – II A) Type of beam connection 1. Connecting members used B) Framed Connection 2. Flange cleats only C) Un-stiffened seated connection 3. Flange and web clips D) Stiffened seated connection 4. Web cleat only
A – 3, B – 4, C – 2, D - 1
While seated connections typically have a seat angle (attached to the supporting flange, hence 'flange cleat') and often a top angle (for lateral stability), this pairing suggests the primary connecting members are related to the flange. Therefore, the correct answer is A – 3, B – 4, C – 2, D - 1.
Important Questions from General Design Principles
Pick up the correct statement from the following:
The yield strength for a mild steel specimen was found to be 250 N/mm2. Taking a safety factor of 2, find out the working stress.
As per IS 800:2007, the maximum effective slenderness ratio for a steel member always subjected to tension force is ______.
Response reduction factor for ductile shear wall with special RC moment resisting frame as per IS 1893 (part 1):2002 is:
As per IS: 800-2007, the area of splice plates shall exceed the area of the flange element spliced by at least
