In a Compaction test, as the compaction effort is increased, the optimum moisture content_____.
decreases
A compaction test is performed in soil mechanics to determine the relationship between the moisture content and the dry density of a soil for a specified compaction effort. The goal is to find the maximum dry density (MDD) that can be achieved for a given soil using a specific compaction effort, and the corresponding moisture content at which this maximum dry density occurs is called the optimum moisture content (OMC).
Compaction effort refers to the amount of mechanical energy applied to the soil sample during the test. It is typically controlled by factors such as:
Increasing the compaction effort means applying more energy to the soil sample during the test.
When the compaction effort is increased in a compaction test, the soil particles are forced closer together more effectively. This allows a higher dry density to be achieved. The relationship between moisture content and dry density for different compaction efforts can be visualized through compaction curves.
Consider compaction curves for two different compaction efforts:
Imagine plotting dry density versus moisture content for two tests on the same soil, one with standard effort and one with modified (higher) effort. The curve for the higher effort will be above the curve for the standard effort, and its peak (MDD) will be shifted to the left, indicating a lower OMC.
This happens because with higher energy, less water is needed to act as a lubricant to achieve maximum particle rearrangement and density. The higher energy input overcomes some of the inter-particle friction and forces particles into a denser configuration at lower moisture levels compared to a test with lower energy.
Therefore, as the compaction effort is increased, the optimum moisture content decreases.
In a standard proctor test, the water content (W 1) and maximum dry density (γ dmax) are related as
For standard compaction test done on soil, the mass of hammer and drop of the hammer are:
In a proctor test, 1.8 kg of moist soil was filled in the mould (volume = 944 cc) after compaction. A soil sample weighting 23 g was taken from the mould and oven dried for 24 hours at a temperature of 110°C. The weight of the dry sample was found to be 20 g. The specific gravity of soil solids is G = 2.7. The theoretical maximum value of the dry unit weight of the soil at that water content is equal to _____
The zero – air voids curve is non – linear owing to: