According to Ohm’s law, current in a conductor is directly proportional to:
Voltage
Ohm's law states that at constant temperature the current through a conductor is given by \(I=\frac{V}{R}\).
Here \(V\) is the applied voltage and \(R\) is the resistance.
For a fixed resistance, increasing the voltage increases the current in the same proportion, so current is directly proportional to voltage.
Current is inversely proportional to resistance, and power and resistivity are separate quantities, not what current varies directly with here.
Hence, the answer is Voltage.
Which property of a fuse wire ensures it melts quickly when excess current flows?
Where should an ammeter be connected in a circuit to measure current accurately?
Which type of current changes both magnitude and direction at definite intervals?
A copper wire has a resistance of 3 Ω and carries a current of 4 A. What is the power loss in the wire due to heating?
A magnetic core carries a magnetic flux of 0.02 Wb. If the cross-sectional area of the core is kept the same, which action will most directly increase the magnetic flux?
What value of inductor should be connected in parallel with a series combination of 4 H and 2 H so that the effective inductance of the circuit is 3 H?
What does the magnetic permeability of a material represent?
Two magnetic paths are made of the same material and have the same cross-sectional area. Path X has length 0.1 m, and Path Y has length 0.3 m. Which statement is correct about their reluctances?
What is the SI unit of magnetic flux?
Why is an ammeter always connected in series with the load while measuring current in a circuit?
In a series lamp circuit, each bulb is rated for 2 V. Calculate the number of bulbs to be connected in series to run on a 110 V AC line.
For domestic wiring purposes, how are circuits connected?
If the potential difference across the ends of a conductor is halved, what happens to the current flowing through it?
1 kWh is equivalent to:
A choke has characteristics of______