All Exams Test series for 1 year @ ₹349 only
Question

Where is the lower end of a lightning conductor fixed in the building ?

The correct answer is

inside the ground

Understanding the Placement of a Lightning Conductor

A lightning conductor is an essential safety device used on buildings to protect them from damage caused by lightning strikes. It works by providing a low-resistance path for the lightning current to flow safely to the ground, instead of passing through the building structure.

Components of a Lightning Conductor

A typical lightning conductor system consists of three main parts:

  • The Air Terminal (Upper End): This is usually a pointed rod or a set of rods placed at the highest point of the building, such as on the roof. Its purpose is to intercept the lightning strike.
  • The Down Conductor (Main Strip): This is a thick strip of metal (like copper or aluminium) that runs down the side of the building, connecting the air terminal to the ground. It carries the lightning current safely away from the building's structure.
  • The Earth Termination System (Lower End): This is the part of the lightning conductor that is connected to the ground. It consists of electrodes or plates buried deep underground.

Where the Lower End is Fixed

The lower end of the lightning conductor, known as the earth termination system, must be securely fixed inside the ground. This is crucial for several reasons:

  • It allows the massive electrical charge from the lightning strike to be safely dispersed into the earth.
  • Burying the electrodes provides a large surface area in contact with the soil, which helps in quickly conducting the current away.
  • The depth and type of earth connection are designed to ensure minimal resistance to the flow of electricity into the ground.

If the lower end were not properly connected to the ground, the lightning current could still cause significant damage to the building and pose a risk of fire or electric shock.

Looking at the options provided:

  • at the top: This describes the upper end (air terminal), not the lower end.
  • at a window: This is not where the conductor is terminated.
  • at the base floor: While the conductor runs down the building, its termination point is not just at the base floor level, but deeper underground.
  • inside the ground: This correctly describes the location where the lower end of the lightning conductor is fixed to safely dissipate the electrical charge.

Therefore, the lower end of a lightning conductor is fixed inside the ground.

Was this answer helpful?

Important Questions from Current, Resistance and Electricity

  1. The ratio of potential difference across the terminals of a conductor to the current flowing through it is the :
  2. The resistivity of a current-carrying conducting wire is p. If the wire is doubled in length and its area of cross-section is reduced by half, the new resistivity is:

  3. The unit of rate of flow of electric charge is -

  4. If the current through an electrical machine running on direct current is 15 A and the machine runs for 10 minutes, the charge that passes through the machine during this time is:

  5. Which base unit, was discovered in 1820, represents one coulomb of electric current per second?

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App