All Exams Test series for 1 year @ ₹349 only
Question

The resistivity of a current-carrying conducting wire is p. If the wire is doubled in length and its area of cross-section is reduced by half, the new resistivity is:

The correct answer is

same as the old value

Resistivity of a Conducting Wire

Resistivity, denoted by the symbol $\rho$ (rho), is a fundamental property of a material that quantifies how strongly it resists electric current. It is an intrinsic characteristic, meaning it depends solely on the nature of the material itself and its temperature, not on its shape or size.

Understanding Resistivity's Nature

Unlike electrical resistance ($R$), which depends on the dimensions of the conductor (length $L$ and area of cross-section $A$), resistivity is independent of these physical dimensions. The relationship between resistance and resistivity is given by the formula:

$$R = \rho \frac{L}{A}$$

Where:

  • $R$ is the resistance of the wire (measured in Ohms, $\Omega$)
  • $\rho$ is the resistivity of the material (measured in Ohm-meters, $\Omega \cdot m$)
  • $L$ is the length of the wire (measured in meters, $m$)
  • $A$ is the area of the cross-section of the wire (measured in square meters, $m^2$)

This formula clearly shows that resistance is directly proportional to resistivity, directly proportional to length, and inversely proportional to the area of cross-section. However, resistivity itself is a constant for a given material at a specific temperature and does not change with the physical dimensions of the conductor.

Impact of Changing Wire Dimensions

The question describes a scenario where a current-carrying conducting wire's length is doubled and its area of cross-section is reduced by half. Let's analyze the initial and final states:

  • Initial State: The wire has an original length $L$, an original area of cross-section $A$, and an original resistivity $\rho$.
  • Final State: The wire's new length becomes $L' = 2L$ (doubled), and its new area of cross-section becomes $A' = \frac{A}{2}$ (reduced by half). The new resistivity is denoted as $\rho'$.

Even though the physical dimensions of the wire (length and area) change significantly, the material of the wire remains the same. Resistivity is an inherent material property. As long as the material itself and its temperature do not change, its resistivity will remain constant.

Conclusion on New Resistivity Value

Since resistivity is an intrinsic property of the material and is not affected by changes in the wire's length or area of cross-section, the new resistivity ($\rho'$) will be the same as the old resistivity ($\rho$). The modifications to the wire's dimensions will indeed change its resistance, but they will not affect its resistivity.

Therefore, if the original resistivity is $\rho$, the new resistivity will also be $\rho$, which means it remains the same as the old value.

Was this answer helpful?

Important Questions from Current, Resistance and Electricity

  1. The ratio of potential difference across the terminals of a conductor to the current flowing through it is the :
  2. The unit of rate of flow of electric charge is -

  3. If the current through an electrical machine running on direct current is 15 A and the machine runs for 10 minutes, the charge that passes through the machine during this time is:

  4. Which base unit, was discovered in 1820, represents one coulomb of electric current per second?

  5. Where is the lower end of a lightning conductor fixed in the building ?

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App