All Exams Test series for 1 year @ ₹349 only
Question

Two steel plates are to be connected together by a 5 mm fillet weld of length 150 mm to transfer a design load. If the size of the fillet weld used to connect the same two plates is changed to 6 mm, the weld length (in mm) needed for transferring the same design load is ________ (in integer).

Fillet Weld Load Capacity

The strength of a fillet weld is proportional to the product of its size (s) and length (L). Since the design load must remain constant, the product $ s \times L $ must remain constant.

This leads to the relationship: $ s_1 \times L_1 = s_2 \times L_2 $

Determining Required Weld Length

Given values are:

  • Initial weld size, $ s_1 = 5 $ mm
  • Initial weld length, $ L_1 = 150 $ mm
  • New weld size, $ s_2 = 6 $ mm

Substituting these values into the equation $ s_1 \times L_1 = s_2 \times L_2 $ and solving for $ L_2 $ determines the required length.

The required weld length is 120 mm.

Was this answer helpful?

Important Questions from Welded Connections

  1. The shortest distance from the root of the fillet weld to the face of the diagrammatic weld is known as_______.

  2. What will be the Minimum size of fillet weld if the plate thickness is less than 10mm?

  3. The minimum length of butt weld shall be:

  4. A circular tube of thickness 10 mm and diameter 250 mm is welded to a flat plate using 5 mm fillet weld along the circumference. Assume Fe410 steel and shop welding. 
    As per IS 800:2007, the torque that can be resisted by the weld (in kN.m) is ________ (round off to one decimal place).

  5. If the angle between fusion faces of a fillet weld is 60° - 90°, the effective throat thickness as per Indian standard is equal to

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App