All Exams Test series for 1 year @ ₹349 only
Question

A circular tube of thickness 10 mm and diameter 250 mm is welded to a flat plate using 5 mm fillet weld along the circumference. Assume Fe410 steel and shop welding. 
As per IS 800:2007, the torque that can be resisted by the weld (in kN.m) is ________ (round off to one decimal place).

The correct answer is
65.1

Understanding Weld Torque Calculation

The question asks for the torque resistance of a fillet weld connecting a circular tube to a flat plate, according to IS 800:2007. We need to calculate the shear capacity of the weld and relate it to the torque it can resist.

Calculating Weld Parameters

  • Fillet weld size, $w = 5$ mm.
  • Throat thickness, $t_t = 0.7 \times w = 0.7 \times 5 = 3.5$ mm.
  • Tube diameter, $D = 250$ mm.
  • Weld length along the circumference, $L = \pi D = \pi \times 250 \approx 785.4$ mm.
  • Lever arm (distance from center to weld), $r = D/2 = 125$ mm.

Determining Weld Strength

For Fe410 steel, the yield strength is $f_y = 410$ MPa. We assume the ultimate strength ($f_u$) relevant for weld calculation is $410$ MPa.

The partial safety factor for shop welding is $\gamma_{m1} = 1.25$.

The design shear strength of the weld ($f_{wd}$) as per IS 800:2007, Clause 10.5.7.1.1, is:

$ f_{wd} = \frac{f_u}{\sqrt{3} \gamma_{m1}} $ $ f_{wd} = \frac{410 \text{ MPa}}{\sqrt{3} \times 1.25} \approx \frac{410}{2.16506} \approx 189.46 \text{ MPa} $

Calculating Torque Resistance

The maximum shear force ($F_s$) the weld can resist is its effective area multiplied by the design shear strength:

  • Weld effective area $= L \times t_t \approx 785.4 \text{ mm} \times 3.5 \text{ mm} \approx 2748.9 \text{ mm}^2$.
  • Maximum Shear Force, $F_s = \text{Area} \times f_{wd} \approx 2748.9 \text{ mm}^2 \times 189.46 \text{ N/mm}^2 \approx 520,750 \text{ N}$.

The torque ($T$) resisted by the weld is the maximum shear force multiplied by the lever arm:

$ T = F_s \times r $ $ T \approx 520,750 \text{ N} \times 125 \text{ mm} = 65,093,750 \text{ N.mm} $

Final Result Conversion

Convert the torque from N.mm to kN.m:

$ T = \frac{65,093,750 \text{ N.mm}}{1000 \times 1000} = 65.09375 \text{ kN.m} $

Rounding to one decimal place, the torque resisted by the weld is $65.1$ kN.m.

Was this answer helpful?

Important Questions from Welded Connections

  1. Two steel plates are to be connected together by a 5 mm fillet weld of length 150 mm to transfer a design load. If the size of the fillet weld used to connect the same two plates is changed to 6 mm, the weld length (in mm) needed for transferring the same design load is ________ (in integer).
  2. The shortest distance from the root of the fillet weld to the face of the diagrammatic weld is known as_______.

  3. What will be the Minimum size of fillet weld if the plate thickness is less than 10mm?

  4. The minimum length of butt weld shall be:

  5. If the angle between fusion faces of a fillet weld is 60° - 90°, the effective throat thickness as per Indian standard is equal to

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App