All Exams Test series for 1 year @ ₹349 only
Question

The connection of one beam to another beam by means of an angle at the bottom and an angle at the top, is known as

The correct answer is
seated connection

Understanding Beam Connection Types

A connection where one beam joins another, using angle connections at both the top and the bottom of the beam ends, is generally termed a seated connection.

This type of connection provides support to the beam resting on a seat (often a bracket or the flange of another member) and uses angles to prevent rotation or provide additional stability.

Identifying the Correct Terminology

The specific description matches the definition of a standard seated connection. Without additional details about stiffeners or specific load transfer mechanisms, this general term is the most appropriate classification.

  • Unstiffened seated connection and stiffened seated connection are specific subtypes that include additional components (stiffeners) not mentioned in the general description.
  • Therefore, the broad category, seated connection, accurately describes the configuration given.

The correct answer is Option C.

Was this answer helpful?

Important Questions from Structural Fasteners

  1. Based on the primary load the connection is expected to carry, which one of the following is NOT a type?
  2. If strength of joint per pitch length is equal to 2556 kg and original strength of plate per pitch length is 4260 kg, joint efficiency will be

  3. Which of the following is a type of bolt?

  4. For single cover butt joints where thickness of thinner plate is 't', thickness of cover plate is taken as-

  5. What will be the diameter of the standard size bolt hole, as per IS 800 : 2007, if the nominal diameter of the bolt is 24 mm?

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App