For single cover butt joints where thickness of thinner plate is 't', thickness of cover plate is taken as-
1.125t
In structural steel connections, a butt joint is used to join two plates placed end-to-end. A single cover butt joint utilizes one plate (the cover plate) placed on one side of the main plates and connected to both main plates, typically using bolts or rivets.
The design of such joints requires specifying the dimensions, including the thickness of the cover plate, to ensure adequate strength and load transfer.
According to standard design practices and codes for single cover butt joints, the thickness of the single cover plate is related to the thickness of the main plates being joined. Specifically, it is based on the thickness of the thinner of the two main plates.
Let 't' represent the thickness of the thinner main plate.
The rule for determining the minimum thickness of a single cover plate in a butt joint is that it should not be less than 1.125 times the thickness of the thinner main plate.
Therefore, the thickness of the cover plate is given by:
Cover plate thickness $\geq 1.125 \times t$
So, if the thickness of the thinner main plate is 't', the required thickness of the cover plate is taken as 1.125t for design calculations and detailing.
If strength of joint per pitch length is equal to 2556 kg and original strength of plate per pitch length is 4260 kg, joint efficiency will be
Which of the following is a type of bolt?
What will be the diameter of the standard size bolt hole, as per IS 800 : 2007, if the nominal diameter of the bolt is 24 mm?