The colour of the third band of a colour-coded carbon resistor of resistance \( 2.3 \times 10^2 \) Ω would be:
Brown
Carbon resistors are common electronic components used to provide specific electrical resistance in a circuit. Their resistance value is often indicated by a series of coloured bands printed on the body of the resistor. Each colour corresponds to a digit, a multiplier, or a tolerance percentage, following a standard code.
A typical four-band resistor has the following bands:
In this question, we are given the resistance value of a carbon resistor and asked to find the colour of the third band.
The given resistance value is \( 2.3 \times 10^2 \) Ω.
The standard format for representing the resistance value using the first three colour bands is \( AB \times 10^C \), where A and B are the first two significant digits derived from the first and second bands, respectively, and C is the exponent of the multiplier \( 10^C \) derived from the third band.
We need to rewrite the given resistance \( 2.3 \times 10^2 \) Ω in the form \( AB \times 10^C \) Ω, where A and B are single digits (0-9).
Let's convert \( 2.3 \times 10^2 \) Ω:
\( 2.3 \times 10^2 = 2.3 \times 100 = 230 \) Ω.
Now, we express 230 in the form \( AB \times 10^C \). We can write 230 as \( 23 \times 10^1 \).
Comparing \( 23 \times 10^1 \) Ω with the standard form \( AB \times 10^C \) Ω:
The third band of the resistor represents the multiplier, which is \( 10^C \). In our case, the multiplier is \( 10^1 \).
To find the colour of the third band, we need to refer to the standard resistor colour code chart and find the colour corresponding to the multiplier \( 10^1 \).
Here is a table showing the standard colour code for resistors:
| Colour | Digit (Bands 1 & 2) | Multiplier (Band 3) | Tolerance (Band 4) |
|---|---|---|---|
| Black | 0 | \( 10^0 \) | — |
| Brown | 1 | \( 10^1 \) | \( \pm 1 \% \) |
| Red | 2 | \( 10^2 \) | \( \pm 2 \% \) |
| Orange | 3 | \( 10^3 \) | — |
| Yellow | 4 | \( 10^4 \) | — |
| Green | 5 | \( 10^5 \) | \( \pm 0.5 \% \) |
| Blue | 6 | \( 10^6 \) | \( \pm 0.25 \% \) |
| Violet | 7 | \( 10^7 \) | \( \pm 0.1 \% \) |
| Gray | 8 | \( 10^8 \) | \( \pm 0.05 \% \) |
| White | 9 | \( 10^9 \) | — |
| Gold | — | \( 10^{-1} \) | \( \pm 5 \% \) |
| Silver | — | \( 10^{-2} \) | \( \pm 10 \% \) |
| None | — | — | \( \pm 20 \% \) |
We found that the multiplier for the resistance \( 2.3 \times 10^2 \) Ω, expressed as \( 23 \times 10^1 \) Ω, is \( 10^1 \).
Looking at the "Multiplier (Band 3)" column in the colour code chart, the colour corresponding to the multiplier \( 10^1 \) is Brown.
Therefore, the colour of the third band of the carbon resistor is Brown.
| Band Number | Meaning |
|---|---|
| 1st Band | First Significant Digit |
| 2nd Band | Second Significant Digit |
| 3rd Band | Multiplier (\( 10^C \)) |
| 4th Band | Tolerance (\( \pm \% \)) |
While the first three bands give the nominal resistance value, the fourth band indicates the tolerance. Common tolerance values are \( \pm 5\% \) (Gold band), \( \pm 10\% \) (Silver band), and \( \pm 20\% \) (no band). Tolerance tells you the range within which the actual resistance value is expected to fall.
Another important characteristic of a resistor is its power rating, measured in watts (W). This indicates the maximum amount of power the resistor can safely dissipate as heat without being damaged. Common power ratings for carbon resistors include 1/8 W, 1/4 W, 1/2 W, 1 W, and higher. The physical size of the resistor often gives a clue to its power rating, with larger resistors generally having higher power ratings.
Understanding both the colour code (for resistance and tolerance) and the power rating is essential when selecting the correct resistor for an electronic circuit.
The current flowing through the two bulbs marked as 60W, 240V each when connected in series with a 240V source is:
Choose the correct relation between drift velocity (vd) and current density (J):
In an experiment, a student in the laboratory measures the terminal potential difference (V) of a cell (emf E and internal resistance r) as a function of current I flowing through it and plots a graph taking V on y-axis and I on x-axis. What is the slope of the graph between V and I?
A car has a fresh storage battery of e.m.f. 15V and internal resistance 4×10−2Ω. If the starter motor draws a current of 85A, what is the terminal voltage of the battery when the starter is on?
(D) only