All Exams Test series for 1 year @ ₹349 only
Question

A transistor has / have_______ layers of material.

The correct answer is

3

Transistor Material Layers Explained

A transistor is a crucial semiconductor device that is widely used in modern electronics for various functions, primarily for amplifying or switching electronic signals and electrical power. The question asks about the number of material layers a transistor has.

Understanding Transistor Structure

The most common type of transistor, particularly when referring to distinct material layers, is the Bipolar Junction Transistor (BJT). A BJT is fundamentally constructed from three separate layers of semiconductor material, each doped differently to achieve specific electrical properties.

These three distinct layers are:

  • Emitter (E): This is the first layer, which is typically the most heavily doped. Its primary role is to "emit" or inject a large number of charge carriers (either electrons or holes) into the base region.
  • Base (B): This is the middle layer, which is very thin and lightly doped. The base acts as a control region. A small current or voltage applied to the base can control a much larger current flow between the emitter and the collector.
  • Collector (C): This is the third layer, which is moderately doped and usually has a larger physical area compared to the emitter and base. Its function is to "collect" the charge carriers that have passed through the base from the emitter.

Based on the type of doping (N-type or P-type semiconductors) used for these three layers, BJTs are classified into two main types:

  • NPN Transistor: In this configuration, a P-type semiconductor layer serves as the base, sandwiched between two N-type semiconductor layers (N-P-N structure).
  • PNP Transistor: Here, an N-type semiconductor layer functions as the base, placed between two P-type semiconductor layers (P-N-P structure).

In both NPN and PNP configurations, a transistor is always formed by stacking three distinct layers of semiconductor material. These three layers create two PN junctions within the device, which are essential for its operation.

Was this answer helpful?

Important Questions from Configuration of BJT

  1. Identify the features of CC configuration from the options given below.
  2. The C.E. configuration is normally preferred because it provides :

    i. voltage gain
    ii. current gain
    iii. power gain
    iv. stability

    Which is correct ?

  3. Match the following :

    List – IList – II 
    a. CE-amplifieri. Low bandwidth high input impedance amplifier
    b. CB-amplifierii. Audio frequency amplifier
    c. JFET amplifieriii. Radio frequency amplifier
    d. CC-amplifieriv. Buffer amplifier

    Codes :

  4. Read the statements regarding transistor.

    A. The dopping level of emitter region is more than base region but less than collector region.

    B. The CB configuration is a good current amplifier circuit configuration

    C. The phase difference between I/P and O/P waveforms of a CB configuration amplifying circuit is 0°.

    D. CC configuration transistor amplifier has higher value of I/P resistance and lower values of O/P resistance.

    Choose the correct answer from the options given below:

  5. Following devices are given :

    (a) transistor in CE stage

    (b) transistor in CB stage

    (c) transistor in CC stage

    (d) Op-Amp

    The arrangement of their current gain in ascending order is given by

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App