All Exams Test series for 1 year @ ₹349 only
Question

A pointer of an instrument once deflected returns to zero position, when the current is removed due to

The correct answer is

Controlling torque

Instrument Pointer Mechanism and Controlling Torque

When an electrical measuring instrument is in use, its pointer deflects from the zero position to indicate the value being measured. The question asks what causes the pointer of an instrument to return to the zero position once the current is removed. This return to zero is a critical function for accurate and reliable measurement, ensuring the instrument is ready for subsequent readings.

Controlling Torque: The Key to Zero Return

The primary reason an instrument's pointer returns to its zero position when the current is removed is the action of the controlling torque. This specific torque is an essential component of most analog measuring instruments.

  • Purpose of Controlling Torque: The controlling torque serves two main purposes within a measuring instrument's operational cycle:
    1. It opposes the deflecting torque, which is generated by the current being measured. This opposition allows the pointer to settle at a stable, specific position on the scale, corresponding to the measured value.
    2. Crucially, when the current supply to the instrument is interrupted or removed, the controlling torque acts to bring the pointer back to the initial zero position. Without this restoring force, the pointer would simply remain at its last deflected position, making the instrument unusable for future measurements without manual resetting.
  • Generation of Controlling Torque: Controlling torque is typically implemented using one of two common methods:
    • Spring Control: This is the most widely used method. It involves two delicate hairsprings (often made of phosphor bronze) attached to the instrument's moving system. As the system deflects due to the deflecting torque, these springs twist, generating an opposing torque that is directly proportional to the angle of deflection. When the current is removed, the springs untwist, pulling the pointer precisely back to the zero mark.
    • Gravity Control: This method is less common and is primarily used in instruments designed for fixed, vertical mounting. It involves attaching small weights to the moving system in such a way that gravity produces a restoring torque. As the system deflects, the position of the weights changes, and gravity acts to return them, and thus the pointer, to their original zero position.

For instruments with spring control, the magnitude of the controlling torque (${T_c}$) is directly proportional to the angle of deflection ($\theta$):

\[T_c \propto \theta\] \[T_c = K\theta\]

Here, ${K}$ represents the spring constant. When the current is removed, the deflecting torque becomes zero. With no opposing force, the controlling torque then efficiently forces the pointer to return to $\theta = 0$.

Deflecting Torque: Causing Pointer Movement

The initial movement of the pointer away from the zero position, which indicates a measurement, is caused by the deflecting torque (${T_d}$). This torque arises from the interaction of the current flowing through the instrument's coils with its magnetic field. The deflecting torque's purpose is to move the pointer across the scale in proportion to the quantity being measured.

For instance, in a Permanent Magnet Moving Coil (PMMC) instrument, the deflecting torque is directly proportional to the current (${I}$):

\[T_d \propto I\]

At a stable reading, the deflecting torque is precisely balanced by the controlling torque:

\[T_d = T_c\] \[KI = K\theta\]

Damping Torque: Preventing Pointer Oscillations

Another important torque in an instrument is the damping torque (${T_{dam}}$). Its primary function is to prevent the pointer from oscillating excessively around its final steady-state position. Without adequate damping, the pointer would swing back and forth multiple times before settling on a reading, making accurate and quick readings difficult. Damping torque is unique because it only acts when the pointer is in motion and becomes zero once the pointer is stationary. Therefore, it does not contribute to bringing the pointer back to the zero position when the current is removed. Common damping methods include air friction damping, fluid friction damping, and eddy current damping.

Other Options for Pointer Return

  • Action of gravity: While gravity can be used to generate controlling torque (as in gravity-controlled instruments), it is not the generalized "action of gravity" that brings the pointer back. Instead, it's a specifically engineered system designed to use gravity for control. Most modern and portable instruments rely on spring control for better accuracy and versatility.
  • Mass of the pointer: The mass of the pointer affects the instrument's inertia and overall sensitivity. However, the mass itself does not provide a restoring force to return the pointer to zero. In fact, an excessively large pointer mass could increase inertia, potentially slowing down both the deflection and the return to zero.

Measuring Instruments: Overview of Torques

Type of Torque Primary Function When it Acts
Deflecting Torque (${T_d}$) Initiates pointer movement from zero, proportional to the measured quantity. As long as current flows through the instrument.
Controlling Torque (${T_c}$) Opposes deflecting torque, ensures a stable reading, and returns pointer to zero when current is off. When the pointer is deflected; continuously opposes $T_d$ or restores to zero.
Damping Torque (${T_{dam}}$) Reduces oscillations of the pointer, allowing it to settle quickly and without overshooting. Only when the pointer is in motion.

In summary, for an instrument's pointer to reliably return to its zero position after the removal of current, the presence and proper functioning of the controlling torque are absolutely essential. This mechanism ensures the instrument is reset and ready for subsequent accurate measurements.

Was this answer helpful?

Important Questions from Indicating Instruments

  1. How many types of Phase Sequence Indicators are there?
  2. How many control springs are provided in Power Factor Meter?
  3. The true r.m.s. voltmeter employes two thermocouples in order to -

  4. In order to get best results, indicating instruments are -

  5. To which class of instruments do Tangent galvanometer and Rayleigh’s current balance belong to?

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App