All Exams Test series for 1 year @ ₹349 only
Question

A FCC crystal with a lattice parameter of $0.3615$ nm is used to measure the wavelength of monochromatic X-rays. The Bragg angle ($\theta$) for the reflection from $(111)$ planes is $21.68^{\circ}$. The wavelength of X-rays (in nm, rounded off to three decimal places) is_____.

Bragg's Law for X-ray Diffraction

Bragg's Law describes the condition for constructive interference (diffraction) of X-rays scattered by crystal planes. The equation is:

$ n\lambda = 2d\sin\theta $

Where:

  • \(n\) is the order of reflection (typically taken as 1 for the first-order maximum).
  • \(\lambda\) is the wavelength of the X-rays.
  • \(d\) is the spacing between the crystal planes.
  • \(\theta\) is the Bragg angle (the angle between the incident beam and the diffracting planes).

Interplanar Spacing Calculation for FCC

For a Face-Centered Cubic (FCC) crystal structure, the interplanar spacing \(d_{hkl}\) for planes with Miller indices (hkl) is related to the lattice parameter \(a\) by the formula:

$ d_{hkl} = \frac{a}{\sqrt{h^2 + k^2 + l^2}} $

In this case, we are considering the (111) planes, so \(h=1\), \(k=1\), and \(l=1\).

$ d_{111} = \frac{a}{\sqrt{1^2 + 1^2 + 1^2}} = \frac{a}{\sqrt{3}} $

Given the lattice parameter \(a = 0.3615\) nm:

$ d_{111} = \frac{0.3615 \text{ nm}}{\sqrt{3}} \approx \frac{0.3615 \text{ nm}}{1.73205} \approx 0.2087 \text{ nm} $

X-ray Wavelength Determination

Now, we can use Bragg's Law to find the wavelength \(\lambda\). We assume the first-order reflection (\(n=1\)).

$ \lambda = \frac{2d_{111}\sin\theta}{n} $

Substitute the known values:

  • \(d_{111} \approx 0.2087\) nm
  • \(\theta = 21.68^{\circ}\)
  • \(n = 1\)

First, find the sine of the angle:

$ \sin(21.68^{\circ}) \approx 0.3691 $

Now, calculate the wavelength:

$ \lambda = \frac{2 \times 0.2087 \text{ nm} \times 0.3691}{1} $

$ \lambda \approx 0.4174 \text{ nm} \times 0.3691 $

$ \lambda \approx 0.1540 \text{ nm} $

The calculated wavelength is approximately $0.154$ nm, which falls within the range specified by the correct answer (0.153 nm to 0.155 nm).

Was this answer helpful?

Important Questions from Crystal Structure Density Atomic Packing Factor

  1. Match the crystal systems in Column I with the corresponding axial lengths (a, b, c) and interaxial angles ($\alpha$, $\beta$, $\gamma$) provided in Column II
    Column IColumn II
    (P) Tetragonal(1) $a \neq b \neq c$, $\alpha = \beta = \gamma = 90^\circ$
    (Q) Rhombohedral(2) $a = b \neq c$, $\alpha = \beta = \gamma = 90^\circ$
    (R) Orthorhombic(3) $a \neq b \neq c$, $\alpha = \gamma = 90^\circ \neq \beta$
    (S) Monoclinic(4) $a = b = c$, $\alpha = \beta = \gamma \neq 90^\circ$
  2. The coordination number for an octahedral site in pure copper is __________.
  3. For a bcc metal the ratio of the surface energy per unit area of the (100) plane to that of the (110) plane is ________
  4. Pure iron transforms from body centered cubic (BCC) to face centered cubic (FCC) crystal structure at $912 \text{ °C}$. If the lattice parameter of the BCC phase is $0.293 \text{ nm}$ and that of the FCC phase is $0.363 \text{ nm}$, the associated volume change is ________ (in % to one decimal place)
  5. If saturation magnetization of iron at room temperature is $1700 \text{ kA m}^{-1}$, the magnetic moment (in $A \text{ m}^2$) per iron atom in the crystal is: _________ $ \times 10^{-23}$
    (round off to 1 decimal place).
    (Given: Lattice parameter of iron at room temperature = 0.287 nm)
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App