Question
The discharge through a trapezoidal channel is maximum when
The correct answer is
Half of top width = one of the sloping sides
Half of top width = one of the sloping sides: Therefore, the condition for maximum discharge through a trapezoidal channel is when half of the top width is equal to one of the sloping sides.
Was this answer helpful?
Important Questions from Open Channel Flow
- A trapezoidal channel carries $5\text{ m}^3\text{.s}^{-1}$ of water under uniform flow condition. The channel has a bottom width of $2\text{ m}$, side slope of $2:1$ (horizontal: vertical), and a bed slope of $1\%$. If the Manning roughness coefficient is $0.03$, the conveyance of the channel, in $\text{m}^3\text{.s}^{-1}$, is
- Two rectangular channels, A and B, join to form a large rectangular channel, C. Each rectangular channel is lined with the same material and has the same bottom slope. The bottom widths of Channels A and B are $2\text{ m}$ and $1\text{ m}$, respectively. If the flow depth in each channel is $2\text{ m}$, the bottom width of Channel C (in m) is ________. (Rounded off to two decimal places)
- Water is flowing at the rate of 15 m$^3$/s through a rectangular channel of 5 m width.
If the acceleration due to gravity ($g$) is 9.81 m/s$^2$, the critical velocity for the flow is ______ m/s (rounded off to three decimal places). A Hydraulic Jump is said to be Oscillating Jump if its Froude number is ________.
The Francis formula for the discharge over cippoletti weir is
Need Expert Advice?
