All Exams Test series for 1 year @ ₹349 only
Question

The capacitance of a capacitor is 4 μF and its potential is 100 V. The energy released on discharging it fully will be:

The correct answer is

0.02 J

Calculating Energy Released from a Discharging Capacitor

Understanding the energy stored in a capacitor is a fundamental concept in physics and electronics. When a capacitor is fully charged to a certain potential, it stores electrical potential energy. Upon discharging, this stored energy is released.

The problem provides the capacitance of a capacitor and the potential difference across it when it is charged. We need to find the energy released when it is fully discharged, which is equal to the energy it stored when fully charged.

Given Information:

  • Capacitance, \(C = 4 \, \mu\text{F}\)
  • Potential difference (Voltage), \(V = 100 \, \text{V}\)

Unit Conversion:

The capacitance is given in microfarads (\(\mu\text{F}\)). We need to convert this to the standard SI unit, Farads (\(\text{F}\)).

\(1 \, \mu\text{F} = 10^{-6} \, \text{F}\)

So, \(C = 4 \, \mu\text{F} = 4 \times 10^{-6} \, \text{F}\)

Formula for Stored Energy in a Capacitor:

The energy (\(U\)) stored in a capacitor can be calculated using the formula:

\(U = \frac{1}{2} C V^2\)

where:

  • \(U\) is the energy stored (in Joules, J)
  • \(C\) is the capacitance (in Farads, F)
  • \(V\) is the potential difference across the capacitor (in Volts, V)

Step-by-Step Calculation:

Now, we substitute the given values of \(C\) and \(V\) into the formula:

\(U = \frac{1}{2} \times (4 \times 10^{-6} \, \text{F}) \times (100 \, \text{V})^2\)

First, calculate the square of the voltage:

\((100 \, \text{V})^2 = 100 \times 100 \, \text{V}^2 = 10000 \, \text{V}^2 = 10^4 \, \text{V}^2\)

Now, substitute this back into the energy formula:

\(U = \frac{1}{2} \times (4 \times 10^{-6}) \times (10^4)\)

\(U = \frac{1}{2} \times 4 \times 10^{-6} \times 10^4\)

\(U = 2 \times 10^{(-6 + 4)}\)

\(U = 2 \times 10^{-2} \, \text{J}\)

Converting this to decimal form:

\(U = 2 \times 0.01 \, \text{J}\)

\(U = 0.02 \, \text{J}\)

The energy stored in the capacitor is 0.02 J. When the capacitor is fully discharged, the energy released will be equal to the energy it stored, which is 0.02 J.

Comparing with Options:

Let's look at the given options:

  1. 0.02 J
  2. 0.04 J
  3. 0.025 J
  4. 0.05 J

Our calculated value of 0.02 J matches option 1.

Revision Table: Capacitor Energy and Formulas

Concept Formula Units
Capacitance (\(C\)) \(C = \frac{Q}{V}\) Farads (F)
Charge (\(Q\)) \(Q = C V\) Coulombs (C)
Energy Stored (\(U\)) \(U = \frac{1}{2} C V^2 = \frac{1}{2} \frac{Q^2}{C} = \frac{1}{2} Q V\) Joules (J)
Potential Difference (\(V\)) \(V = \frac{U \times 2}{Q}\) or \(V = \sqrt{\frac{2U}{C}}\) Volts (V)

Additional Information on Capacitor Discharge and Energy

When a capacitor discharges through a circuit (like a resistor), the stored electrical energy is converted into other forms, often heat (in a resistor). The process of discharge involves the movement of charge from one plate to the other until the potential difference across the capacitor becomes zero.

  • The energy calculated using \(U = \frac{1}{2} C V^2\) represents the total potential energy stored in the electric field between the capacitor plates.
  • During charging, work is done by the voltage source to move charge against the electric field in the capacitor. The total work done by the source is \(Q V\), but only half of this energy is stored in the capacitor; the other half is typically dissipated as heat in the charging circuit resistance.
  • During discharging through a resistor, the stored energy \( \frac{1}{2} C V^2 \) is entirely dissipated as heat in the resistor.
  • Capacitors are used in circuits for various purposes, including energy storage, filtering, timing circuits, and smoothing voltage fluctuations.
Was this answer helpful?

Important Questions from Electrostatic Potential and Capacitance

  1. What is the mathematical expression for potential gradient?

  2. A cube of side 'a' has a charge Q at each of its vertices. What is the potential due to this charge array at the centre of the cube?

  3. A parallel plate capacitor with air between the plates has a capacitance of 6pF. What will be the capacitance if the distance between the plates is reduced to half and the space is filled with a dielectric constant 5?

  4. What is the unit of electric flux in terms of the base units of SI?

  5. A capacitor charged from a 50 V DC supply is found to have a charge of 10μC. The capacitance of the capacitor would be:

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App