A Timeout caused by a Post Packet may be caused by
1. Noise on a transmission line
2. Overflow of buffer
3. Packet discarded at a congested router
4. Due to fragmentation
A packet timeout occurs in networking when a sender transmits a data packet and does not receive an acknowledgment (ACK) from the receiver within a predetermined time limit. This timeout triggers the sender to retransmit the packet, assuming it was lost or significantly delayed in transit.
Let's examine the potential causes listed:
This is a valid cause. Electrical interference or physical defects in the transmission medium (like cables) can introduce errors (noise) into the data packets. Corrupted packets might be detected and discarded by the receiver or network devices. If the sender doesn't receive an acknowledgment for the packet due to this corruption or subsequent discard, it will eventually time out and retransmit.
Buffer overflow can lead to packet loss. When network devices (like routers or switches) receive data faster than they can process or forward it, their internal memory buffers can fill up. If a buffer overflows, new incoming packets might be dropped. This packet drop can lead to a timeout on the sender's end if no acknowledgment is received.
This is a common and direct cause. Network congestion occurs when the volume of traffic exceeds the capacity of the network links or devices. Routers experiencing congestion often implement queue management mechanisms that discard packets (especially older ones or those considered less important) to manage buffer space and maintain some level of service for other packets. The sender, upon not receiving an acknowledgment for the discarded packet, initiates a timeout.
Fragmentation is the process of breaking down a large IP packet into smaller pieces (fragments) to traverse networks with smaller Maximum Transmission Unit (MTU) sizes. While fragmentation itself isn't a direct cause of timeout, the loss of any fragment means the original packet cannot be reassembled. If a fragment is lost (due to causes like noise or congestion), the sender will eventually time out waiting for acknowledgments or the completion of the reassembled packet.
Based on the analysis:
Therefore, the most direct and commonly cited causes among the options provided are transmission line noise and packet discards at congested routers.
| (i) | Parallel computing | (a) | Group of computers and devices are linked together to form a huge computer |
| (ii) | Grid computing | (b) | All the different processors have access to shared memory |
| (iii) | Cloud computing | (c) | Gets computational power just like electricity through wall sockets |
| (iv) | Cluster computing | (d) | Uses internet and remote servers to maintain data and applications |